null

WAGO 2000-5310/102-000

(No reviews yet) Write a Review
SKU:
2000-5310/102-000
Condition:
New
  • Wago 2000-5310/102-000
  • Wago 2000-5310/102-000
  • Wago 2000-5310/102-000
$10.39

Description

Description 3-conductor actuator supply terminal block; for PNP-(high-side) switching actuators; with ground connection via push-in type jumper bars 
Remarks Item description:

3.5 mm spacing per signal (2 x 3.5 mm = 7 mm)

The double spacing per pole of this terminal block series maximizes connectivity. For example, ten sensors may be connected using only five sensor terminal blocks plus a power supply terminal block.




Safety information 1: Ground connection via commoning to terminal blocks with ground foot

 
 
Item properties

Miscellaneous

Name Value Unit
Total number of connection points   
Total number of potentials   
Color  gray   
Ratings per  IEC/EN 60947-7-1   
Rated voltage (III / 3) [V]  250 
Rated impulse voltage (III / 3) [kV]  kV 
Rated current [A]  13.5 
Connection technology  Push-in CAGE CLAMP    
Number of connection points connector   
Actuation type  Operating tool   
Connectable conductor materials  Copper   
Nominal cross section  1 mm nbsp;  
Solid conductor  0.14 1.5 mm / 24 16 AWG   
Solid conductor, push-in termination  0.5 1.5 mm / 20 16 AWG   
Fine-stranded conductor  0.14 1.5 mm / 24 16 AWG   
Fine-stranded conductor with ferrule, push-in termination fr  0.5 mm / 20 AWG   
Strip length  9 11 mm / 0.35 0.43 Inch   
Solid conductor 2  0.25 4 mm / 22 12 AWG   
Solid conductor, push-in termination 2  0.25 4 mm / 22 12 AWG   
Fine-stranded conductor 2  0.25 4 mm / 22 12 AWG   
Type of wiring  Front-entry wiring   
Design  horizontal   
Marking level  Center/side marking   
Insulating material  Polyamide 66 (PA 66)   
Fire load [MJ]  0.317  MJ 
Weight [g]  14.91 
Width  7 mm / 0.276 Inch   
Height from upper-edge of DIN-35 rail  52.4 mm / 2.063 Inch   
Type of mounting  DIN-35 x 15 carrier rail   
View AllClose

Additional Information

actuation type:
Push-in || Operating tool
approvals per:
C22.2 No 158
color:
Gray
connectable conductor materials:
Copper
connection technology:
Push-in CAGE CLAMP
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
52.4 mm / 2.063 inch
design:
Horizontal type
fine stranded conductor:
0.14 1.5 mm / 24 16 AWG
fine stranded conductor with ferrule push in termination:
0.5 0.75 mm / 20 18 AWG
fine stranded conductor with insulated ferrule:
0.14 0.75 mm / 24 18 AWG
fire load:
0.317 MJ
flammability class per ul94:
V0
height:
81.1 mm / 3.193 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center/side marking
mounting type:
DIN-35 rail
nominal cross section:
1 mm
nominal voltage iii 3:
250 V
note conductor cross section:
Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
packaging type:
Box
rated current:
13.5 A
rated current csa use group c:
0.416666666666667
rated current ul use group b:
15 A
rated current ul use group d:
15 A
rated surge voltage iii 3:
4 kV
rated voltage csa use group c:
300 V
rated voltage ul use group b:
300 V
rated voltage ul use group d:
300 V
ratings per:
IEC/EN 60947-7-1
safety information 1:
Ground connection via commoning to terminal blocks with ground foot
solid conductor:
0.14 1.5 mm / 24 16 AWG
solid conductor push in termination:
0.5 1.5 mm / 20 16 AWG
strip length:
9 11 mm / 0.35 0.43 inch
weight:
14.910 g
width:
7 mm / 0.276 inch
wiring direction:
Front-entry wiring
View AllClose