WAGO 2200-1201
- SKU:
- 2200-1201
- Condition:
- New
- conformity marking:
- CE
- connection technology:
- CAGE CLAMP
- connection type 1:
- Input/output
- control deviation:
- ¤ 1 %
- country of origin sales organisation germany:
- CN
- default setting:
- DC 24 V
- depth from upper edge of din rail:
- 99 mm / 3.898 inch
- discharge current:
- ¤ 1.5 mA
- efficiency typ:
- 88 % (230 VAC: 2.5 ADC)
- fine stranded conductor:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.000 MJ
- height:
- 90 mm / 3.543 inch
- input current ii:
- ¤ 0.6 A (230 VAC): ¤ 1.2 A (115 VAC)
- input voltage range:
- AC 90 264 V: DC 125 375 V
- inrush current:
- ¤ 18 A
- internal fuse:
- F 2 A / 250 VAC
- isolation voltage pri gnd:
- DC 2.2 kV
- isolation voltage pri sec:
- DC 4.242 kV
- isolation voltage sec gnd:
- DC 0.7 kV
- mains failure hold up time:
- 10 ms (230 VAC)
- mounting type:
- DIN-35 rail || Screw mount
- mtbf:
- > 300,000 h (per IEC 61709)
- nominal input voltage ui nom:
- 1 x AC 100 240 V
- nominal mains frequency range:
- 47 63 Hz: 0 Hz
- nominal output current io nom:
- 2.5 A (24 VDC: 110 240 VAC): 2 A (24 VDC: 100 240 VAC)
- nominal output power:
- 60 W
- nominal output voltage uo nom:
- DC 24 V (SELV)
- note conductor cross section:
- 12 AWG: THHN, THWN
- open circuit proof:
- Yes
- operation status indicator:
- Green LED (Uo)
- output voltage range:
- DC 22 26 V (adjustable)
- overload behavior:
- Constant power (in overload range: 1.05 1.4 x Io nom): Shutdown and automatic restart in the event of a short circuit
- overvoltage category:
- II
- packaging type:
- Box
- parallel operation:
- Yes
- phases:
- 1
- pollution degree:
- 2
- power factor correction pfc:
- Passive
- power loss pl:
- ¤ 12 W (230 VAC: 24 VDC: 2.5 A)
- protection class:
- I
- protection type:
- IP20 (per EN 60529)
- recommended backup fusing:
- Circuit breaker: B6, B10
- relative humidity:
- 10 95 % (no condensation permissible)
- required backup fusing:
- An external DC fuse is required for the DC input voltage.
- residual ripple:
- ¤ 200 mV (Peak-to-peak)
- resistance to reverse feed:
- ¤ DC 30 V
- series operation:
- Yes, for 2 devices of the same type
- short circuit protected:
- Yes
- signaling:
- 1 x LED DC OK (green)
- solid conductor:
- 0.08 2.5 mm / 28 12 AWG
- standards specifications:
- EN 61204-3 || EN 60335-1 || EN 62368-1 || UL 60950-1 || UL 508
- strip length:
- 6 7 mm / 0.24 0.28 inch
- surrounding air temperature operation:
- -20 60 C
- surrounding air temperature storage:
- -25 75 C
- transient suppression primary:
- Varistor
- wago connector:
- WAGO 236 Series
- weight:
- 300.000 g
- width:
- 40 mm / 1.575 inch
Description
TOPJOBS feedthrough terminal block with Push-buttons; rail mount; 2-conductor; 3.5 mm wide; gray
View AllClose