Baumer IR18V.D08L-F50.UA1Z.9BDU/0035_A002_E010 11176397

Baumer IR18V.D08L-F50.UA1Z.9BDU/0035_A002_E010 11176397 is a flush-mounted, linearized sensor designed for vehicle applications, offering a measuring distance of 0 to 8 mm with a sensitivity of 0.5 V/mm. It features high resolution and repeat accuracy, with static resolution under 0.008 mm and dynamic resolution under 0.01 mm, and repeat accuracy at 0.016 mm. The linearity error is ±120 µm, and it has a temperature drift of ±8% of full scale. This sensor meets multiple standards including EN 60947-5-2, EN 60947-5-7, EN 13309:2010, EN ISO 14982:2009, and ISO 13766:2006, and responds in less than 1 ms. It operates on a voltage supply range of 4.75 to 5.25 VDC, with a maximum current consumption of 12 mA at no load, and outputs an analog signal from 0.5 to 4.5 VDC. The sensor is equipped with short circuit protection, has a load resistance over 4500 Ohm, and is designed to withstand electromagnetic interference and emissions as per ISO 11452 and EN 55011 standards. The cylindrical threaded design features a PBT sensing face and a brass nickel-plated housing, measuring 18 mm in diameter and 50 mm in length. It connects via a Flylead connector DT04-3P 3 pin, supports a tightening torque of up to 40 Nm, and operates within a temperature range of -40 to +85 °C. The sensor is highly durable, rated IP 68 for both the sensing face and sensor body, and IP 69K for the sensing face, ensuring protection against dust, water, and high-pressure water jets.