The Baumer OG080U.R-GW1O.7VL is a through beam sensor designed for precise object detection with a minimum size of 0.5 mm. It features a repeat accuracy of 0.06 mm and a rapid response time of less than 0.1 ms. The sensor is equipped with a potentiometer for sensitivity adjustment over a 270° range and utilizes a pulsed red LED light source with a wavelength of 660 nm. It offers multiple switching frequencies including 5000 Hz (default), 1500 Hz, 250 Hz, and 8000 Hz, and operates on a voltage supply range of 10 to 30 VDC. The output function can switch between light and dark operation, and it includes a push-pull / IO-Link output circuit. The sensor is built with a robust stainless steel housing, offers short circuit and reverse polarity protection, and operates within a temperature range of -25 to +60 °C. It is designed with a U profile, measures 100 mm in width, 80 mm in height, and 10 mm in depth, and is IP 67 rated for protection against dust and water ingress. The connection is facilitated via a 3-pin M8 connector.
- Type:
- Through beam sensor
- Object size:
- > 0.5 mm
- Repeat accuracy:
- 0.06 mm
- Response time / release time:
- < 0.1 ms
- Hysteresis:
- < 0.25 mm
- Sensitivity adjustment:
- Potentiometer, 270° IO-Link
- Light source:
- Pulsed red LED
- Wave length:
- 660 nm
- Light indicator:
- LED yellow
- Switching frequency:
- 5000 Hz , default 1500 Hz 250 Hz 8000 Hz
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 30 mA
- Output function:
- Light / dark operate switchable
- Output circuit:
- Push-pull / IO-Link
- Voltage drop Vd:
- <2.8 VDC
- Output current:
- 200 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 100 mm
- Fork width Sb:
- 80 mm
- Height / length:
- 80 mm
- Penetration depth:
- 55 mm
- Depth:
- 10 mm
- Design:
- U profile
- Housing material:
- Stainless steel 1.4404 (V4A)
- Connection types:
- Connector M8, 3 pin
- Operating temperature:
- -25 +60 °C
- Protection class:
- IP 67
- Datasheet:
- View
