Baumer OR18W.EI-NW1P.9VO 11157854 is a through beam sensor designed for washdown applications, featuring a receiver with a 13 m actual range and a 20 m nominal range. It includes LED indicators for alignment and output status, and offers sensitivity adjustment via a 270° potentiometer. The sensor has a fast response time of less than 2 ms, operates on a 12-30 VDC supply, and consumes a maximum of 40 mA with typical consumption around 30 mA. It supports both light and dark operating modes with an NPN output circuit and can handle an output current of 100 mA. Equipped with short circuit and reverse polarity protection, this sensor has a cylindrical threaded design with a diameter of 18 mm and a length of 67.2 mm, constructed from durable stainless steel 1.4404 (V4A) and PMMA optics. It connects via an M12 4-pin connector and operates between -25 to +55 °C, meeting IP 67/69K protection standards.
- Type:
- Through beam sensor
- Special type:
- Washdown design
- Emitter / receiver:
- Receiver
- Actual range Sb:
- 13 m
- Nominal range Sn:
- 20 m
- Alignment / soiled lens indicator:
- LED green
- Output indicator:
- LED yellow
- Sensitivity adjustment:
- Potentiometer, 270°
- Response time / release time:
- < 2 ms
- Voltage supply range +Vs:
- 12 30 VDC
- Current consumption max. (no load):
- 40 mA
- Current consumption typ.:
- 30 mA
- Voltage drop Vd:
- <2 VDC
- Output function:
- Light / dark operate
- Output circuit:
- NPN
- Output current:
- 100 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 18 mm
- Height / length:
- 67.2 mm
- Design:
- Cylindrical threaded
- Housing material:
- Stainless steel 1.4404 (V4A)
- Front (optics):
- PMMA
- Connection types:
- Connector M12 4 pin
- Operating temperature:
- -25 +55 °C
- Protection class:
- IP 67/69K
- Datasheet:
- View
