Dynapar DWD3805000020 Draw Works Encoder with Stainless Steel Hubshaft
Dynapar
$1,687.00
The draw works encoder allows for multiple encoders to be added to a draw works machine. The stainless steel 1/2" NPT hubshaft can be used to stack up to five dual IS encoders thereby supplying feedback to ten control or measurement devices on a drill rig. The entire package is hardened to live up to the rigors of the roughneck's job.
- Series:
- DWD38
- Average leadtime:
- 5 Business Days
- Feedback Type:
- Incremental
- Technology Sensing Type:
- Optical
- Weight (Pounds):
- 5.1
- Connection Location:
- Radial
- Connection Type:
- Connector
- Disk Material:
- Aluminum
- Flange Material:
- Powder Coated Aluminum
- Maximum Operating Speed (RPM):
- 6000
- Shaft / Bore Material:
- 300 Series Stainless Steel
- Shaft / Bore Size (mm):
- 15.875
- Shaft Type:
- Shafted
- Special Shaft Feature:
- 5/8" -18 UNF Male x 1"-14 UNS Female
- Starting Torque (Ncm):
- 3.18
- Termination:
- 10 Pin MS
- Duty Cycle:
- 45-55%
- Incremental Signals:
- A, B, Z
- Input Voltage:
- 5-26 VDC
- Line Driver Type:
- 7272
- Maximum Frequency Response (KHz):
- 125
- Output Signal:
- 5-26 VDC
- Resolution (PPR):
- 500
- Reverse Polarity Protection:
- Yes
- Approvals / Certifications:
- [CE, ROHS]
- Hazardous Area Rating:
- [None]
- Hazardous Area Rating Certification:
- [None]
- Housing Protection Level:
- IP67
- Humidity Non-Condensing (%):
- 98
- Maximum Operating Temperature (°C):
- 100
- Maximum Storage Temperature (°C):
- 100
- Minimum Operating Temperature (°C):
- -40
- Minimum Storage Temperature (°C):
- -40
- Noise Immunity Testing Specification:
- EN61326-1
- Shock Resistance:
- 400G, 6msec
- Vibration Resistance:
- 20G, 5-3000Hz
- Datasheet:
- View
