Description
AC 1 Friction Clutches FW 0.875,PILOT MOUNT,SPCL FLATNESS
View AllClose
| "Special With Precision Friction Interface And Non-Contact Seal On Pulley Bearing, Created For Mark Andy, See F-450 802863 For A Direct Replacement Upgrade" | |
| Comments: | "Pilot Mount Clutches Accept Customer Supplied Pulleys Or Sprockets, Or Nexen Couplings" |
| Comments: | Can Be Configured As A DRIVING Shaft Mounted Clutch-Brake With Disc And Caliper Listed Under Accessories In Left Column |
| Open Or Enclosed Design: | Open |
| Drive Arrangement: | Pilot Mount |
| Bore Size: | 0.875 in.;0-0.75 With Bushings |
| Minimum Shaft Insertion: | "2.00 in. From Pilot End, Full From Air Chamber End" |
| Bore Style: | Straight |
| Pilot Size: | 2.500 in. |
| Pilot Or Drive Flange Bolt Circle Data: | "4, 0.250""-20 Bolts @ 90° On A 3.000 in. Circle" |
| Length: | 4.75 in. |
| Clutch Facing Type: | Standard Coefficient |
| Clutch Facing Edge Color Code: | Red |
| Maximum Clutch Continuous Thermal Dissipation: | 0.25 hp |
| Clutch Heat Sink Capacity: | 30000 ftlb |
| Clutch Peak Thermal Input Rate: | 10.70 hp |
| Minimum Sprocket Size: | "25/48T, 35/32T, 40/25T, 50/21T" |
| Drive Inertia: | 4.70 lbin² |
| Shaft Inertia: | 4.79 lbin² |
| Max Rpm: | 1800 |
| Actuation/Return: | Air/Spring |
| Port Size: | 0.125 NPT |
| Maximum Operating Pressure: | 80 psi |
| Minimum Engagement Pressure: | 5 psi |
| Temperature Range: | 32 - 150 °F |
| Approximate Clutch Facing Life: | 230 hphr |
| Clutch Air Chamber Volume When New: | 0.266 in³ |
| Clutch Air Chamber Volume When Worn Out: | 0.695 in³ |
| Ratings: | "CE, And RoHS" |
| Finish: | Black Oxide |
| Outer Diameter: | 4.56 in. |
| Restrictions: | This Clutches Bore Can Be Reduced With The Bushings Found In Accessories To The Left |
| Shipping Weight: | 6.5 LB |
