Description
STC Tension Control Clutches STC600 1.125 BORE,SPCL
View AllClose
| "Special STC940 Rotor And Drive Disc With Quick Change Facing With Precision Interface And STC600 Pilot And Air Chamber, Exclusive For Mark Andy" | |
| Features: | Three Sets Of Different Sized Actuators Provide Wide Range Of Tension Control |
| Open Or Enclosed Design: | Open |
| Drive Arrangement: | Pilot Mount |
| Bore Size: | 1.125 in. |
| Bore Style: | Straight |
| Pilot Size: | 3.500 in. |
| Pilot Or Drive Flange Bolt Circle Data: | "6, 0.250""-20 Bolts @ 60° On A 4.000 in. Circle" |
| Length: | 6.78 in. |
| Clutch Facing Type: | Low Coefficient |
| Clutch Facing Edge Color Code: | Green |
| Maximum # Of Calipers: | 3 |
| Maximum Clutch Continuous Thermal Dissipation: | 3.00 hp |
| Clutch Peak Thermal Input Rate: | 41.00 hp |
| Maximum Dynamic Torque With All Calipers: | 590 inlbs |
| Maximum Dynamic Torque With Large Pistons: | 284 inlbs |
| Maximum Dynamic Torque With Medium Pistons: | 188 inlbs |
| Maximum Dynamic Torque With Small Pistons: | 111 inlbs |
| Maximum Dynamic Torque: | 590 inlbs |
| Minimum Sprocket Size: | "35/52T, 40/39T, 50/31T" |
| Drive Inertia: | 18.72 lbin² |
| Shaft Inertia: | 104.40 lbin² |
| Max Rpm: | 1800 |
| Actuation/Return: | Air/Spring |
| Port Size: | 0.125 NPT Or 5/32 in. Plastic Tubing |
| Operating Range: | 1-85 psi |
| Temperature Range: | 32 - 150 °F |
| Approximate Clutch Facing Life: | 4500 hphr |
| Ratings: | "CE, And RoHS" |
| Finish: | Machined Aluminum |
| Outer Diameter: | 6.00 in. |
| Restrictions: | Should Only Be Used In Horizontal Shaft Applications And Purchased Through Mark Andy Due To Possible Hazzard Of Friction Facings Flying Out If Screws Fail |
| Shipping Weight: | 36.6 LB |
