Description
MTL Mechanical Torque Limiter MTL60-PMK-SP-0.625-25/80,W/48T,#40
View AllClose
| If You Don't See Exactly What You Need Refer To The Technical Data Sheet In The Left Hand Column Of This Page For The Range Of Options | |
| Features: | "High Performance, Zero Backlash, Adjustable, Mechanical Torque Limiter" |
| Comments: | Can Be Adjusted While Installed With Index Gage And Spanner Wrench Listed Under Accessories To The Left |
| Comments: | Double Bearing Support For Pulleys And Sprockets |
| Open Or Enclosed Design: | Open |
| Drive Arrangement: | 40/48T Single Sprocket |
| Bore Size: | 0.625 in. |
| Input Keyway: | None |
| Bore Style: | "Straight, Keyed" |
| Pilot Size: | 55 mm |
| Pilot Or Drive Flange Bolt Circle Data: | "6, M5 Holes @ 60° On A 63 mm Bolt Circle" |
| Pilot Maximum Radial Load: | 2300 N |
| Maximum Static Clutch Torque: | 80 Nm |
| Minimum Static Clutch Torque: | 25 Nm |
| Torque Range: | 25 - 80 Nm |
| Factory Torque Setting: | 76 Nm |
| Backlash: | 0.00 ArcSec |
| Number Of Engagement Positions: | 1 |
| Shaft Inertia: | 5.00 kgcm² |
| Max Rpm: | 3500 |
| Mounting Style: | Straight Bore With Keyway |
| Temperature Range: | "-30 - 120 °C Nominal, 150 °C Intermittent Peak" |
| Ratings: | "CE, And RoHS" |
| Finish: | "Bare Aluminum And Black Oxide, Corrosion Resistant Per DIN 50021 Salt 140 Hours, Or Stainless Steel" |
| "Options Available: Bore Size, Keyway, Torque Range, Factory Torque Setting, # Of Engagemet Positions, Sealed, And Stainless Steel" | |
| Shipping Weight: | 8.0 LB |
