Description
MTL Mechanical Torque Limiter MTL60-ECC-FD-0.625-32MM-20/40
View AllClose
If You Don't See Exactly What You Need Refer To The Technical Data Sheet In The Left Hand Column Of This Page For The Range Of Options | |
Features: | See Technical Data Sheet Under Resources In Left Column For Ordering Details |
Comments: | Can Be Adjusted While Installed With Index Gage And Spanner Wrench Listed Under Accessories To The Left |
Comments: | This Unit Fully Disengages The Load Until Manually Reengaged |
Open Or Enclosed Design: | Open |
Drive Arrangement: | Coupling |
Bore Size: | 0.625 in./32 mm |
Input Keyway: | None |
Bore Style: | "Straight, No Keyways" |
Length: | 96.0 mm |
Torque Range: | 20 - 40 Nm |
Factory Torque Setting: | 20 Nm |
Backlash: | 0.00 ArcSec |
Number Of Engagement Positions: | 6 @ 60° |
Shaft Inertia: | 5.00 kgcm² |
Max Rpm: | 12100 |
Output Shaft Diameter: | 0.625 in. |
Output Keyway: | None |
Mounting Style: | Clamp Collars Without Keyways |
Temperature Range: | "-30 - 120 °C Nominal, 150 °C Intermittent Peak" |
Coupling Brand/Type: | Elastomer Insert |
Maximum Angular Misalignment: | 0.8° |
Maximum Axial Float From Initial Spacing: | ± 2.00 mm |
Maximum Lateral Misalignment: | 0.10 mm |
Torsional Rigidity: | "9,750 Nm/Rad" |
Ratings: | "CE, And RoHS" |
Finish: | "Bare Aluminum And Black Oxide, Corrosion Resistant Per DIN 50021 Salt 140 Hours, Or Stainless Steel" |
Outer Diameter: | 83.0 mm |
"Options Available: Bore Size, Keyway, Torque Range, Factory Torque Setting, # Of Engagemet Positions, Sealed, And Stainless Steel" | |
Shipping Weight: | 2.7 LB |