PULS CP20.241-R2 Redundant Power Supply

Redundant Power Supply
24V, 20A  

• AC 100-240V Wide-range Input
• Width only 48mm
• Built-in Decoupling Mosfet for 1+1 and n+1 Redundancy
• Efficiency up to 95.2%
• 20% Output Power Reserves
• Safe HiccupPLUS Overload Mode
• Easy Fuse Breaking – 3 times nominal current for 12ms
• Active Power Factor Correction (PFC)
• Minimal Inrush Current Surge
• Full Power Between -40°C and +60°C
• DC-OK Relay Contact
• Current Sharing Feature Included
• With hot swappable plug connectors

The CP-Series, part of the DIMENSION power supply family are cost optimized without compromising quality, reliability and performance. 
The CP20.241-Rx units include a decoupling MOSFET for building 1+1 or n+1 redundant power supply systems without the need of external redundancy modules.
These redundancy power supplies come with three connection terminal options; screw terminals, spring-clamp terminals or plug connector terminals which allows replacement on an active application.
The most outstanding features of these units are high efficiency, electronic inrush current limitation, active PFC and the wide operational temperature range.
The devices also have a power reserve of 20% included, which may even be used continuously at temperatures up to +45°C. Additionally, they can deliver 3 times the nominal output current for 12ms which helps to trip fuses on faulty output branches.
With high immunity to transients and power surges, low electromagnetic emission, a DC-OK signal contact for remote monitoring, and a large international approval package, makes this unit suitable for nearly every application.