Schneider Electric ABE7P16T214 Base For Em-Ss Rel.Fus-Ch 16O-Without Co

(No reviews yet) Write a Review
SKU:
ABE7P16T214
UPC:
3389110644579
Condition:
New
Connections - Terminals:
screw type terminals, 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16) flexible with cable end || screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 12) solid || screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable end |
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Net Weight:
0.675 kg
Rohs Exemption Information:
Yes
Resistance To Incandescent Wire:
750 °C IEC 60695-2-11
Voltage Drop On Power Supply Fuse:
0.3 V
Maximum Supply Current:
0.0416666666666667
Range Of Product:
Modicon ABE7
Ambient Air Temperature For Operation:
-5-60 °C IEC 61131-2
Product Certifications:
CSA || GL || DNV || UL || EAC
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Ip Degree Of Protection:
IP2X conforming to IEC 60529
Product Compatibility:
ABR7S2. || ABS7SA2. || ABS7SC2. || ABE7ACC20
Polarity Distribution:
volt-free
Fixing Mode:
by clips 35 mm symmetrical DIN rail) || by screws solid plate with fixing kit)
[Us] Rated Supply Voltage:
19...30 V IEC 61131-2
Sub-Base Type:
output sub-base
[Uimp] Rated Impulse Withstand Voltage:
2.5 kV
Status Led:
1 LED per channel (Green) channel status || 1 LED (Green) power ON
Number Of Channels:
16
Installation Category:
II IEC 60664-1
Maximum Current Per Output Common:
16 A
Vibration Resistance:
2 gn 10-150 Hz)IEC 60068-2-6
Resistance To Fast Transients:
2 kV level 3 IEC 61000-4-4
Ambient Air Temperature For Storage:
-40-80 °C IEC 61131-2
Resistance To Radiated Fields:
10 V/m 26000000-1000000000 Hz)IEC 61000-4-3 level 3
Channel Additional Information:
1 switch disconnector per channel
Tightening Torque:
0.6 N.m flat Ø 3.5 mm
Warranty:
18 months
Resistance To Electrostatic Discharge:
4 kV contact) level 3 IEC 61000-4-2 || 8 kV air) level 3 IEC 61000-4-2
Product Or Component Type:
sub-base for plug-in relay
Environmental Disclosure:
ENVPEP121229EN
[Ui] Rated Insulation Voltage:
300 V coil circuit/contact circuits IEC 60947-1 || 2000 V terminals/mounting rails
Sustainable Offer Status:
Green Premium product
China Rohs Regulation:
X
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Short-Circuit Protection:
1 A internal fuse, 5 x 20 mm, fast blow PLC end) || 0.5 A fuse per channel, 5 x 20 mm, fast blow output circuit)
Supply Circuit Type:
DC
Mercury Free:
Yes
Circularity Profile:
ENVEOLI1212029EN
Pollution Degree:
2 IEC 60664-1
  • Schneider Electric ABE7P16T214 Base For Em-Ss Rel.Fus-Ch 16O-Without Co
  • Schneider Electric ABE7P16T214 Base For Em-Ss Rel.Fus-Ch 16O-Without Co
  • Schneider Electric ABE7P16T214 Base For Em-Ss Rel.Fus-Ch 16O-Without Co
$698.00

Description

This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. This sub-base for plug-in relay, provides 16 channels. It has 1 switch disconnector per channel. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. It weighs 0.675kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This sub-base is suitable for use with ABR7S2, ABS7SA2, ABS7SC2 and ABE7ACC20 connection sub-base accessory. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
View AllClose