Schneider Electric ABLM1A05036 Power Supply 5V 3.6A Modular

(No reviews yet) Write a Review
SKU:
ABLM1A05036
UPC:
3606481500137
Condition:
New
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Output Protection Type:
against overload and short-circuits automatic reset || against over temperature manual reset || against overvoltage manual reset
Connections - Terminals:
screw connection 0.5...1.5 mm², AWG 20...AWG 16) without wire end ferrule input/output || screw connection 0.5...1 mm², AWG 20...AWG 18) with wire end ferrule input/output
Output Voltage Limits:
4.5...5.5 V
Height:
91 mm
Earthing System:
TN || TT || IT
Electrical Shock Protection Class:
class II without PE connection
Line And Load Regulation:
< 0.5 % network in line || < 1 % network 0 to 100 % load
Electromagnetic Compatibility:
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || electromagnetic field immunity test - tes
Input Protection Type:
integrated fuse (not interchangeable) 3.15 A || external protection (recommended) 20 A Curve B || external protection (recommended) 20 A Curve C || external protection (recommended) 4 A Curve B || external protection (recommended) 4 A Curve C
Vibration Resistance:
3 mm 2-9 Hz)IEC 60721-3-3 || 10 m/s² 9-200 Hz)IEC 60721-3-3
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Leakage Current:
0.25 mA 240 V AC
Environmental Disclosure:
ENVPEP2004005EN
Inrush Current:
25 A 115 V || 50 A 230 V
Circularity Profile:
ENVEOLI2004005EN
Net Weight:
0.170 kg
Pollution Degree:
2
Load Capacitance:
3000 µF
Current Consumption:
< 0.6 A 115 V AC || < 0.4 A 230 V AC
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail || panel mounting
Enclosure Material:
Plastic
Dielectric Strength:
3000 V AC input/output
Holding Time:
> 20 ms 115 V AC || > 60 ms 230 V AC
Efficiency At Full Load:
90...264 V AC
Range Of Product:
Modicon Power Supply
Status Led:
1 LED (Green) output voltage
Sustainable Offer Status:
Green Premium product
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Standards:
IEC 62368-1 || EN/IEC 61010-1 || EN 61010-2-201 || EN/IEC 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || UL 61010-1 || UL 61010-2-201 || CSA C22.2 No 62368-1 || CSA C22.2
Width:
36 mm
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Efficiency:
80 % 115 V AC || 80 % 230 V AC
Residual Ripple:
< 100 mV
Rohs Exemption Information:
Yes
Product Certifications:
CE || cUL Listed || cUL Recognized || RCM || CB Scheme || EAC || KC || NEC class 2
Ip Degree Of Protection:
IP20
China Rohs Regulation:
X
Input Voltage:
100...240 V AC single phase || 100...240 V AC phase to phase
Ambient Air Temperature For Operation:
-25-55 °C without current derating mounting position A < 6561.68 ft (2000 m) || 55-70 °C with current derating of 2.67 % per °C mounting position A < 6561.68 ft (2000 m)
Network Frequency Limits:
50-60 Hz
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Response Time:
< 2 s
Power Supply Type:
regulated switch mode
Operating Altitude:
< 6561.68 ft (2000 m) overvoltage category III || 2000 m...5000 m overvoltage category II
Power Supply Output Current:
3.6 A
Output Voltage:
5 V DC
Output Coupling:
serial
Power Factor:
0.48 at 115 V AC || 0.38 at 230 V AC
Kw Rating:
18 W
Electromagnetic Emission:
conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4
Overvoltage Category:
II
Shock Resistance:
150 m/s² 11 ms
Power Dissipation In W:
4.5 W
Product Or Component Type:
power supply
Mercury Free:
Yes
Depth:
55.6 mm
Service Life:
10 year(s)
Meantime Between Failure [Mtbf]:
2500000 h at 25 °C, full load || 1000000 h at 55 °C, 80 % load
$128.01

Description

This ABLM regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 3,6A at 5V DC and a rated power output of 18W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 36mm, its height is 91mm, its depth is 55,6mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 0.170kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 4A, B or C curve . It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to their modular housing, they can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
View AllClose