Schneider Electric ABLM1A12021 Power Supply 12V 2.1A Modular

(No reviews yet) Write a Review
SKU:
ABLM1A12021
UPC:
3606481500144
Condition:
New
Height:
91 mm
Enclosure Material:
Plastic
Environmental Disclosure:
ENVPEP2004005EN
Ip Degree Of Protection:
IP20
Dielectric Strength:
3000 V AC input/output
Maximum Leakage Current:
0.25 mA 240 V AC
Output Protection Type:
against overload and short-circuits automatic reset || against over temperature manual reset || against overvoltage manual reset
Efficiency:
85 % 115 V AC || 85 % 230 V AC
Power Factor:
0.48 at 115 V AC || 0.38 at 230 V AC
Mercury Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Output Voltage:
12 V DC
Depth:
55.6 mm
Sustainable Offer Status:
Green Premium product
Input Voltage:
100...240 V AC single phase || 100...240 V AC phase to phase
Electromagnetic Compatibility:
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || electromagnetic field immunity test - tes
Input Protection Type:
integrated fuse (not interchangeable) 3.15 A || external protection (recommended) 20 A Curve B || external protection (recommended) 20 A Curve C || external protection (recommended) 4 A Curve B || external protection (recommended) 4 A Curve C
Network Frequency Limits:
50-60 Hz
Output Voltage Limits:
12...15 V
Overvoltage Category:
II
Operating Altitude:
< 6561.68 ft (2000 m) overvoltage category III || 2000 m...5000 m overvoltage category II
Circularity Profile:
ENVEOLI2004005EN
Load Capacitance:
3000 µF
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Status Led:
1 LED (Green) output voltage
Efficiency At Full Load:
90...264 V AC
Output Coupling:
serial
Rohs Exemption Information:
Yes
Kw Rating:
25 W
Shock Resistance:
150 m/s² 11 ms
Width:
36 mm
Electrical Shock Protection Class:
class II without PE connection
Product Certifications:
CE || cUL Listed || cUL Recognized || RCM || CB Scheme || EAC || KC || NEC class 2
Connections - Terminals:
screw connection 0.5...1.5 mm², AWG 20...AWG 16) without wire end ferrule input/output || screw connection 0.5...1 mm², AWG 20...AWG 18) with wire end ferrule input/output
Standards:
IEC 62368-1 || EN/IEC 61010-1 || EN 61010-2-201 || EN/IEC 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || UL 61010-1 || UL 61010-2-201 || CSA C22.2 No 62368-1 || CSA C22.2
Meantime Between Failure [Mtbf]:
2500000 h at 25 °C, full load || 1000000 h at 55 °C, 80 % load
Inrush Current:
25 A 115 V || 50 A 230 V
China Rohs Regulation:
X
Current Consumption:
< 0.8 A 115 V AC || < 0.6 A 230 V AC
Line And Load Regulation:
< 0.5 % network in line || < 1 % network 0 to 100 % load
Range Of Product:
Modicon Power Supply
Residual Ripple:
< 100 mV
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ambient Air Temperature For Operation:
-25-55 °C without current derating mounting position A < 6561.68 ft (2000 m) || 55-70 °C with current derating of 2.67 % per °C mounting position A < 6561.68 ft (2000 m)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Electromagnetic Emission:
conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4
Power Supply Type:
regulated switch mode
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail || panel mounting
Power Dissipation In W:
4.6 W
Pollution Degree:
2
Net Weight:
0.170 kg
Service Life:
10 year(s)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Holding Time:
> 20 ms 115 V AC || > 60 ms 230 V AC
Earthing System:
TN || TT || IT
Product Or Component Type:
power supply
Vibration Resistance:
3 mm 2-9 Hz)IEC 60721-3-3 || 10 m/s² 9-200 Hz)IEC 60721-3-3
Response Time:
< 2 s
Power Supply Output Current:
2.1 A
Catalog:
View
Datasheet:
View
  • Schneider Electric ABLM1A12021 Power Supply 12V 2.1A Modular
  • Schneider Electric ABLM1A12021 Power Supply 12V 2.1A Modular
  • Schneider Electric ABLM1A12021 Power Supply 12V 2.1A Modular
$132.01

Description

This ABLM regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 2,1A at 12V DC and a rated power output of 25W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 30mm, its height is 75mm, its depth is 92,8mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 0.170kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 4A, B or C curve. It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to their modular housing, they can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
View AllClose