Schneider Electric ABLM1A24004 Power Supply 24V 0.4A Modular

(No reviews yet) Write a Review
SKU:
ABLM1A24004
UPC:
3606481500106
Condition:
New
Operating Altitude:
< 6561.68 ft (2000 m) overvoltage category III || 2000 m...5000 m overvoltage category II
Product Or Component Type:
power supply
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Load Capacitance:
3000 µF
Electromagnetic Emission:
conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4
Electrical Shock Protection Class:
class II without PE connection
Overvoltage Category:
II
Dielectric Strength:
3000 V AC input/output
China Rohs Regulation:
X
Sustainable Offer Status:
Green Premium product
Meantime Between Failure [Mtbf]:
5000000 h at 25 °C, full load || 1000000 h at 55 °C, 80 % load
Inrush Current:
15 A 115 V || 30 A 230 V
Input Voltage:
100...240 V AC single phase || 100...240 V AC phase to phase
Pollution Degree:
2
Height:
91 mm
Net Weight:
0.099 kg
Output Coupling:
serial
Holding Time:
> 10 ms 115 V AC || > 60 ms 230 V AC
Rohs Exemption Information:
Yes
Power Supply Output Current:
0.42 A
Environmental Disclosure:
ENVPEP2004005EN
Status Led:
1 LED (Green) output voltage
Electromagnetic Compatibility:
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || electromagnetic field immunity test - tes
Range Of Product:
Modicon Power Supply
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Efficiency:
80 % 115 V AC || 80 % 230 V AC
Service Life:
10 year(s)
Current Consumption:
< 0.3 A 115 V AC || < 0.2 A 230 V AC
Product Certifications:
CE || cUL Listed || cUL Recognized || RCM || CB Scheme || EAC || KC || NEC class 2
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail || panel mounting
Power Supply Type:
regulated switch mode
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Kw Rating:
10 W
Output Protection Type:
against overload and short-circuits automatic reset || against over temperature manual or automatic reset || against overvoltage manual or automatic reset
Line And Load Regulation:
< 0.5 % network in line || < 1 % network 0 to 100 % load
Mercury Free:
Yes
Maximum Leakage Current:
0.25 mA 240 V AC
Vibration Resistance:
3 mm 2-9 Hz)IEC 60721-3-3 || 10 m/s² 9-200 Hz)IEC 60721-3-3
Ambient Air Temperature For Operation:
-25-55 °C without current derating mounting position A < 6561.68 ft (2000 m) || 55-70 °C with current derating of 2.67 % per °C mounting position A < 6561.68 ft (2000 m)
Response Time:
< 2 s
Shock Resistance:
150 m/s² 11 ms
Power Dissipation In W:
2.5 W
Depth:
55.6 mm
Connections - Terminals:
screw connection 0.5...1.5 mm², AWG 20...AWG 16) without wire end ferrule input/output || screw connection 0.5...1 mm², AWG 20...AWG 18) with wire end ferrule input/output
Ip Degree Of Protection:
IP20
Enclosure Material:
Plastic
Power Factor:
0.52 at 115 V AC || 0.40 at 230 V AC
Width:
18 mm
Standards:
IEC 62368-1 || EN/IEC 61010-1 || EN 61010-2-201 || EN/IEC 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || UL 61010-1 || UL 61010-2-201 || CSA C22.2 No 62368-1 || CSA C22.2
Input Protection Type:
integrated fuse (not interchangeable) 1 A || external protection (recommended) 20 A Curve B || external protection (recommended) 20 A Curve C || external protection (recommended) 2 A Curve B || external protection (recommended) 2 A Curve C
Earthing System:
TN || TT || IT
Output Voltage:
24 V DC
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Network Frequency Limits:
50-60 Hz
Circularity Profile:
ENVEOLI2004005EN
Efficiency At Full Load:
90...264 V AC
Residual Ripple:
< 100 mV
Catalog:
View
Datasheet:
View
  • Schneider Electric ABLM1A24004 Power Supply 24V 0.4A Modular
  • Schneider Electric ABLM1A24004 Power Supply 24V 0.4A Modular
  • Schneider Electric ABLM1A24004 Power Supply 24V 0.4A Modular
$105.00

Description

This ABLM regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 0,42A at 24V DC and a rated power output of 10W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 18mm, its height is 91mm, its depth is 55,6mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 0.099kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 2A, B or C curve. It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to their modular housing, they can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
View AllClose