Schneider Electric

Schneider Electric ABLS1A48025 Power Supply 48V 2.5A 1Ph Optimized

(No reviews yet) Write a Review
SKU:
ABLS1A48025
UPC:
3606481500243
Condition:
New
Efficiency At Full Load:
85...264 V AC without temperature derating || 120...375 V DC without temperature derating || 85…120 V DC with temperature derating
Net Weight:
0.55 kg
Kw Rating:
120 W
Output Protection Type:
against overload and short-circuits automatic reset || against over temperature manual reset || against overvoltage manual reset
Output Voltage:
48 V DC
Circularity Profile:
ENVEOLI2007005EN
Power Factor:
0.55 at 115 V AC || 0.45 at 230 V AC
Holding Time:
> 20 ms 115 V AC || > 40 ms 230 V AC
Electrical Shock Protection Class:
class I
Power Supply Type:
regulated switch mode
Electromagnetic Compatibility:
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || immunity to conducted RF disturbances - t
Meantime Between Failure [Mtbf]:
700000 h at 25 °C, full load conforming to SR 332
Product Certifications:
CE || cUL Listed || cUL Recognized || RCM || CB Scheme || EAC || KC
Electromagnetic Emission:
conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Residual Ripple:
< 150 mV
Current Consumption:
< 2.5 A 115 V AC || < 1.4 A 230 V AC || < 1.3 A 140 V DC
Dielectric Strength:
3000 V AC with input to output
Ip Degree Of Protection:
IP20
Standards:
IEC 62368-1 || EN/IEC 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || CSA C22.2 No 62368-1 || UL 508 || CSA C22.2 No. 107.1 || EN/IEC 62368-1
Line And Load Regulation:
< 0.5 % network 0 to 100 % load at 25 °C || < 1 % network full voltage range in line at 25 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Input Protection Type:
integrated fuse (not interchangeable) 4 A || external protection (recommended) 20 A Curve C || external protection (recommended) 13 A Curve C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ambient Air Temperature For Operation:
-20--10 °C with current derating of 2 % per °C mounting position A < 6561.68 ft (2000 m) || -10-40 °C without derating mounting position A 115 V AC < 6561.68 ft (2000 m) || -10-50 °C without derating mounting position A 230 V AC < 6561.68 ft (200
Connections - Terminals:
screw connection 0.5...4 mm², AWG 20...AWG 12) without wire end ferrule output || screw connection 0.5...2.5 mm², AWG 20...AWG 14) with wire end ferrule output || screw connection 0.75...4 mm², AWG 18...AWG 12) without wire end ferrule input || sc
Mercury Free:
Yes
Operating Altitude:
< 5000 m
Output Voltage Limits:
44...56 V
Power Supply Output Current:
2.5 A
Response Time:
< 1 s
Shock Resistance:
150 m/s² 11 ms
Earthing System:
TN || TT || IT
Depth:
117.6 mm
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail
Output Coupling:
parallel
Vibration Resistance:
3 mm 2-9 Hz)IEC 60068-2-6 || 10 m/s² 9-200 Hz)IEC 60068-2-6
China Rohs Regulation:
X
Sustainable Offer Status:
Green Premium product
Load Capacitance:
4000 µF
Input Voltage:
100...240 V AC single phase || 100...240 V AC phase to phase || 140...340 V DC
Range Of Product:
Modicon Power Supply
Rohs Exemption Information:
Yes
Network Frequency Limits:
50-60 Hz
Environmental Disclosure:
ENVPEP2007005EN
Product Or Component Type:
power supply
Power Dissipation In W:
23 W
Efficiency:
85 % 115 V AC || 88 % 230 V AC
Pollution Degree:
2
Inrush Current:
30.0 A 115 V || 60.0 A 230 V
Status Led:
1 LED (Green) output voltage
Overvoltage Category:
II
Enclosure Material:
Aluminum
Height:
123.6 mm
Width:
40 mm
Service Life:
10 year(s)
Maximum Leakage Current:
1 mA 240 V AC
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Catalog:
View
Datasheet:
View
$337.00

Description

This ABLS regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC and 140 V to 340 V DC, a rated output current of 2,5A at 48V DC and a rated power output of 120W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 40mm, its height is 123,6mm, its depth is 117,6mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 0.550kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 13A, C-Curve. It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to its book housing, it can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
View AllClose

Related Products

Related Products