null
Schneider Electric ATS01N109FT Soft-Starter 9A 110 480V

Schneider Electric ATS01N109FT Soft-Starter 9A 110 480V

Schneider Electric
SKU:
ATS01N109FT
|
UPC:
3389110667158
$156.00
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
This Altistart 01 soft starter is DIN rail mounted and can feed single or 3-phase asynchronous motors with a rating up to 9A. This Altistart 01 can be used for a motor rated power up to 4kW or 5hp for 3-phase (110V to 480V AC) and up to 1.1kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
Additional Information
Power Range:
1.1-2 kW 200-240 V 1 phase || 2.2-3 kW 200-240 V 3 phase || 4-6 kW 380-440 V 3 phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Net Weight:
0.28 kg
Type Of Start:
start with voltage ramp
Range Of Product:
Altistart 01
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Discrete Output Current:
2 A DC-13 || 3 A AC-15
Supply Voltage Limits:
99-528 V
[Uc] Control Circuit Voltage:
110 V AC +/- 10 % 35 mA || 24 V AC/DC +/- 10 % 30 mA || 240 V AC +/- 10 % 80 mA
Electromagnetic Compatibility:
conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity level 3 EN 50082-1 || EMC
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
[Us] Rated Supply Voltage:
110...480 V - 10...10 %
Operating Position:
vertical +/- 10 degree
Output Voltage:
<= power supply voltage
Relative Humidity:
5-95 % without condensation or dripping water EN/IEC 60068-2-3
Pollution Degree:
2 EN/IEC 60947-4-2
Starting Time:
1 s / 100 || 5 s / 20 || adjustable from 1 to 5 s
Function Available:
integrated bypass
China Rohs Regulation:
X
Phase:
1 phase
Ambient Air Temperature For Storage:
-25-70 °C EN/IEC 60947-4-2
Shock Resistance:
15 gn 11 ms EN/IEC 60068-2-27
Standards:
EN/IEC 60947-4-2
Marking:
CE
Warranty:
18 months
Current Consumption:
45 A at nominal load
Compatibility Code:
ATS01N1
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
Product Or Component Type:
soft starter
Rohs Exemption Information:
Yes
Assembly Style:
with heat sink
Width:
45 mm
Motor Power Kw:
4 kW, 3 phase 400 V || 1.5 kW, 3 phase 230 V || 1.1 kW, 1 phase 230 V
Motor Starter Type:
soft starter
Device Short Name:
ATS01
Tightening Torque:
0.5-0.5 N.m || 1.9-2.5 N.m
Starting Torque:
30...80 % of starting torque of motor connected directly on the line supply
Mercury Free:
Yes
Depth:
131 mm
Ip Degree Of Protection:
IP20
Supply Frequency:
50...60 Hz - 5...5 %
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Electrical Connection:
4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid
Icl Starter Rating:
0.375
Product Specific Application:
simple machine
Network Frequency:
47.5...63 Hz
Maximum Horse Power Rating:
1 hp, 3 phase 210 V || 2 hp, 3 phase 230 V || 5 hp, 3 phase 460 V
Utilisation Category:
AC-53B EN/IEC 60947-4-2
Power Dissipation In W:
1 W at full load and at end of starting || 46 W in transient state
Product Destination:
asynchronous motors
Toxic Heavy Metal Free:
Yes
Height:
124 mm
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Product Certifications:
C-tick || B44.1-96/ASME A17.5 for starter wired to the motor delta terminal || GOST || CSA || CCC || UL
Reach Free Of Svhc:
Yes
Catalog:
View
Datasheet:
View
Related Products