Schneider Electric ATSU01N222LT Soft-Start Stop 22A 200 480V
Schneider Electric
$262.80
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATSU01N222LT Soft-Start Stop 22A 200 480V
The Altistart U01 is a soft start/soft stop unit for 3-phase asynchronous motors. It is designed primarily for combinations with TeSys U starter-controllers. It can be used for a motor rated power up to 11kW or 15hp for 3-phase (200V to 480V AC) and up to 22A rating. It is 45mm wide, this makes it one of the smallest soft starters on the market. It can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Its protection index is IP20. It weighs 0.49kg and its dimensions are, 45mm wide, 314mm high, 170mm deep. The Altistart U01 is designed for the following simple applications like conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It complies with standards IEC/EN 60947-4-2, and carries UL, CSA, C-Tick, and CCC certifications, and CE marking. It can be easily combined with a TeSys U controller by means of the power connector VW3G4104. It is easy to install on a DIN rail. Altistart 01 combines simplicity with easy cabling, fast configuration and efficiency. Reduced machine wear and minimized maintenance time will optimize operations. Together with TeSys Model U, it provides a unique motor starter solution.
- Power Range:
- 4-6 kW 200-240 V 3 phase || 7-11 kW 380-440 V 3 phase
- Device Short Name:
- ATSU01
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
- Display Type:
- 1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
- Current Consumption:
- 100 mA
- Product Specific Application:
- simple machine
- Maximum Switching Voltage:
- 440 V relay outputs
- Phase:
- 3 phase
- Function Available:
- integrated bypass
- Minimum Switching Current:
- 10 mA 6 V DC relay outputs
- Discrete Input Voltage:
- 24...40 V
- Operating Position:
- vertical +/- 10 degree
- Motor Power Kw:
- 11 kW, 3 phase 400 V || 4 kW, 3 phase 230 V || 7.5 kW, 3 phase 400 V || 5.5 kW, 3 phase 230 V
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Product Certifications:
- C-tick || CSA || UL || CCC
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Net Weight:
- 0.49 kg
- Marking:
- CE
- Pollution Degree:
- 2 EN/IEC 60947-4-2
- Toxic Heavy Metal Free:
- Yes
- Discrete Output Current:
- 2 A DC-13 || 3 A AC-15
- Type Of Start:
- start with voltage ramp
- Icl Starter Rating:
- 22 A
- Relative Humidity:
- 5-95 % without condensation or dripping water EN/IEC 60068-2-3
- Maximum Switching Current:
- relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive || relay outputs 2 A 250 V AC AC-15 cos phi = 0.5 20 ms inductive
- Range Of Product:
- Altistart U01 and TeSys U
- Height:
- 314 mm
- Ambient Air Temperature For Storage:
- -25-70 °C EN/IEC 60947-4-2
- Motor Starter Type:
- soft starter
- Vibration Resistance:
- 1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
- Warranty:
- 18 months
- Depth:
- 170 mm
- Maximum Horse Power Rating:
- 5 hp, 3 phase 230 V || 7.5 hp, 3 phase 230 V || 10 hp, 3 phase 460 V || 15 hp, 3 phase 460 V
- Network Frequency:
- 47.5...63 Hz
- Reach Free Of Svhc:
- Yes
- Electromagnetic Compatibility:
- conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity EN 50082-1 || EMC immunity
- [Us] Rated Supply Voltage:
- 200...480 V - 10...10 %
- Product Or Component Type:
- soft starter
- Product Destination:
- asynchronous motors
- Shock Resistance:
- 15 gn 11 ms EN/IEC 60068-2-27
- Output Voltage:
- <= power supply voltage
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Rohs Exemption Information:
- Yes
- Supply Frequency:
- 50...60 Hz - 5...5 %
- Discrete Input Logic:
- positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
- Electrical Connection:
- 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid
- Starting Time:
- 1 s / 100 || 5 s / 20 || 10 s / 10 || adjustable from 1 to 10 s
- Standards:
- EN/IEC 60947-4-2
- Mercury Free:
- Yes
- [Uc] Control Circuit Voltage:
- 24 V DC +/- 10 %
- Input Output Isolation:
- galvanic between power and control
- Discrete Input Type:
- logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
- Width:
- 45 mm
- Supply Voltage Limits:
- 180-528 V
- Utilisation Category:
- AC-53B EN/IEC 60947-4-2
- Deceleration Time Symb:
- adjustable from 1 to 10 s
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Ip Degree Of Protection:
- IP20
- Discrete Output Type:
- open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO
- Tightening Torque:
- 1.9-2.5 N.m || 0.5-0.5 N.m
- Discrete Output Voltage:
- 24 V 6...30 V) open collector logic
- Power Dissipation In W:
- 2.5 W at full load and at end of starting || 222.5 W in transient state
- Starting Torque:
- 30...80 % of starting torque of motor connected directly on the line supply
- Assembly Style:
- with heat sink
- China Rohs Regulation:
- X
- Catalog:
- View
- Datasheet:
- View
