Schneider Electric ATSU01N232LT Soft-Start Stop 32A 200 480V
Schneider Electric
$388.80
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
The Altistart U01 soft start/soft stop unit can feed 3-phase asynchronous motors. It is designed primarily for combinations with TeSys U starter-controllers. It can be used for a motor rated power up to 20hp for 3-phase (200V to 480V AC) and up to 32A rating. It is 45mm wide, this makes it one of the smallest soft starters on the market, it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Its protection index is IP20. It weighs 0.49kg and its dimensions are, 45mm wide, 314mm high, 170mm deep. The Altistart U01 is designed for the following simple applications like conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It complies with standards IEC/EN 60947-4-2, and carries UL, CSA, C-Tick, and CCC certifications, and CE marking. It can be easily combined with a TeSys U controller by means of the power connector VW3G4104. It is easy to install on a DIN rail. Altistart 01 combines simplicity with easy cabling, fast configuration and efficiency. Reduced machine wear and minimized maintenance time will optimize operations. Together with TeSys Model U, it provides a unique motor starter solution.
- Product Specific Application:
- simple machine
- Starting Time:
- adjustable from 1 to 10 s || 1 s / 50 || 10 s / 5 || 5 s / 10
- Input Output Isolation:
- galvanic between power and control
- Power Range:
- 7-11 kW 200-240 V 3 phase || 15-25 kW 380-440 V 3 phase
- Range Of Product:
- Altistart U01 and TeSys U
- Product Destination:
- asynchronous motors
- Relative Humidity:
- 5-95 % without condensation or dripping water EN/IEC 60068-2-3
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Deceleration Time Symb:
- adjustable from 1 to 10 s
- Discrete Output Voltage:
- 24 V 6...30 V) open collector logic
- Shock Resistance:
- 15 gn 11 ms EN/IEC 60068-2-27
- Mercury Free:
- Yes
- Warranty:
- 18 months
- Product Or Component Type:
- soft starter
- Motor Power Kw:
- 15 kW, 3 phase 400 V || 7.5 kW, 3 phase 230 V
- Assembly Style:
- with heat sink
- Device Short Name:
- ATSU01
- Product Certifications:
- UL || CCC || CSA || C-tick
- Output Voltage:
- <= power supply voltage
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
- Ambient Air Temperature For Storage:
- -25-70 °C EN/IEC 60947-4-2
- Discrete Input Type:
- logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
- Rohs Exemption Information:
- Yes
- Network Frequency:
- 47.5...63 Hz
- Utilisation Category:
- AC-53B EN/IEC 60947-4-2
- Maximum Switching Current:
- relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive || relay outputs 2 A 250 V AC AC-15 cos phi = 0.5 20 ms inductive
- Type Of Start:
- start with voltage ramp
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Starting Torque:
- 30...80 % of starting torque of motor connected directly on the line supply
- Power Dissipation In W:
- 2.5 W at full load and at end of starting || 322.5 W in transient state
- [Uc] Control Circuit Voltage:
- 24 V DC +/- 10 %
- Discrete Input Logic:
- positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
- Discrete Input Voltage:
- 24...40 V
- Tightening Torque:
- 1.9-2.5 N.m || 0.5-0.5 N.m
- Depth:
- 170 mm
- Standards:
- EN/IEC 60947-4-2
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Reach Free Of Svhc:
- Yes
- Electrical Connection:
- 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid
- Phase:
- 3 phase
- Pollution Degree:
- 2 EN/IEC 60947-4-2
- Discrete Output Current:
- 2 A DC-13 || 3 A AC-15
- Vibration Resistance:
- 1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
- Icl Starter Rating:
- 32 A
- Function Available:
- integrated bypass
- Discrete Output Type:
- open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO
- Width:
- 45 mm
- Motor Starter Type:
- soft starter
- Supply Voltage Limits:
- 180-528 V
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
- Current Consumption:
- 100 mA
- Electromagnetic Compatibility:
- conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity EN 50082-1 || EMC immunity
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Maximum Switching Voltage:
- 440 V relay outputs
- Minimum Switching Current:
- 10 mA 6 V DC relay outputs
- Height:
- 314 mm
- Toxic Heavy Metal Free:
- Yes
- Operating Position:
- vertical +/- 10 degree
- China Rohs Regulation:
- X
- Net Weight:
- 0.49 kg
- Marking:
- CE
- Display Type:
- 1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached
- Ip Degree Of Protection:
- IP20
- [Us] Rated Supply Voltage:
- 200...480 V - 10...10 %
- Supply Frequency:
- 50...60 Hz - 5...5 %
- Maximum Horse Power Rating:
- 10 hp, 3 phase 230 V || 20 hp, 3 phase 460 V
- Catalog:
- View
- Datasheet:
- View
