Schneider Electric ATV12H037F1 Atv12 0.37Kw 120V 1Ph Heat Sink Tb

(No reviews yet) Write a Review
SKU:
ATV12H037F1
UPC:
3606480071027
Condition:
New
Depth:
121.2 mm
Assembly Style:
with heat sink
Electromagnetic Compatibility:
electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || electrostatic discharge immunity test level 3 IEC 61000-4-2 || immunity to conducted disturbances level 3 IEC 61000-4-6 || radiated radio-frequency electromagnetic field immunity
With Safety Function Safely Limited Position (Slp):
FALSE
Discrete Input Number:
4
4 Quadrant Operation Possible:
FALSE
Standards:
UL 508C || UL 618000-5-1 || IEC 61800-5-1 || IEC 61800-3
Product Certifications:
NOM || CSA || C-tick || UL || GOST || RCM || KC
Asynchronous Motor Control Profile:
voltage/frequency ratio (V/f) || quadratic voltage/frequency ratio || sensorless flux vector control
Braking To Standstill:
by DC injection
Rohs Exemption Information:
Yes
Connector Type:
1 RJ45
Nominal Output Current:
2.4 A
Communication Service:
read holding registers (03) 29 words || write single register (06) 29 words || write multiple registers (16) 27 words || read/write multiple registers (23) 4/4 words || read device identification (43)
Mounting Mode:
cabinet mount
Continuous Output Current:
2.4 A 4 kHz
Data Format:
8 bits, configurable odd, even or no parity
Network Frequency:
50-60 Hz
Supply Frequency:
50/60 Hz +/- 5 %
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Brake Chopper Integrated:
FALSE
Product Or Component Type:
variable speed drive
Height:
143 mm
Discrete Output Number:
2
Transient Overtorque:
150-170 % of nominal motor torque depending on drive rating and type of motor
Net Weight:
0.8 kg
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Ip Degree Of Protection:
IP20
Method Of Access:
server Modbus serial
Width:
72 mm
Line Current:
11.4 A 100 V heavy duty) || 9.3 A 120 V heavy duty)
Range Of Product:
Altivar 12
Pollution Degree:
2
Marking:
CE
Ambient Air Transport Temperature:
-25-70 °C
Nominal Switching Frequency:
4 kHz
With Safety Function Safe Position (Sp):
FALSE
Linearity Error:
+/- 0.3 % of maximum value analogue input
Maximum Output Voltage:
240 V
Frequency Resolution:
analog input converter A/D, 10 bits || display unit 0.1 Hz
Emc Filter:
without EMC filter
Communication Port Protocol:
Modbus
Relay Output Number:
1
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Relative Humidity:
5-95 % without condensation IEC 60068-2-3 || 5-95 % without dripping water IEC 60068-2-3
Ambient Air Temperature For Storage:
-25-70 °C
Quantity Per Set:
set of 1
Speed Range:
45311
Maximum Output Frequency:
4 kHz
With Safety Function Safely Limited Speed (Sls):
FALSE
Regulation Loop:
adjustable PID regulator
Acceleration And Deceleration Ramps:
S || U || linear from 0 to 999.9 s
With Safety Function Safe Direction (Sdi):
FALSE
[Us] Rated Supply Voltage:
100...120 V - 15...10 %
Maximum Transient Current:
3.6 A 60 s heavy duty) || 4.0 A 2 s heavy duty)
Mercury Free:
Yes
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Time Constant:
20 ms +/- 1 ms for reference change
Relative Symmetric Network Frequency Tolerance:
0.05
Sampling Duration:
20 ms +/- 1 ms logic input || 10 ms analogue input
Operating Altitude:
> 3280.84...6561.68 ft (> 1000...2000 m) with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
Physical Interface:
2-wire RS 485
With Safety Function Safe Speed Monitor (Ssm):
FALSE
With Safety Function Safe Torque Off (Sto):
FALSE
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Tightening Torque:
0.8 N.m
Apparent Power:
1.1 kVA 240 V heavy duty)
Operating Position:
vertical +/- 10 degree
Motor Slip Compensation:
preset in factory || adjustable
Product Specific Application:
simple machine
China Rohs Regulation:
X
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Transmission Rate:
9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Base Load Current At High Overload:
2.4 A
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Number Of Addresses:
1-247
Electromagnetic Emission:
radiated emissions environment 1 category C2 IEC 61800-3 2...16 kHz shielded motor cable || conducted emissions with additional EMC filter environment 1 category C1 IEC 61800-3 4...12 kHz shielded motor cable <5 m || conducted emissions with addition
With Safety Function Safe Operating Stop (Sos):
FALSE
Type Of Polarization:
no impedance
Analogue Input Number:
1
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz) - drive unmounted on symmetrical DIN rail - IEC 60068-2-6
Warranty:
18 months
Insulation:
electrical between power and control
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Overvoltage Category:
class III
With Safety Function Safe Stop 1 (Ss1):
FALSE
Noise Level:
0 dB
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Speed Drive Output Frequency:
0.5-400 Hz
Prospective Line Isc:
1 kA
With Safety Function Safe Programmable Logic:
FALSE
Motor Power Kw:
0.37 kW
Power Dissipation In W:
natural 29.0 W
Maximum Horse Power Rating:
0.55 hp
Protection Type:
line supply overvoltage || line supply undervoltage || overcurrent between output phases and earth || overheating protection || short-circuit between motor phases || against input phase loss in three-phase || thermal motor protection via the drive by
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Analogue Output Number:
1
Transmission Frame:
RTU
Ambient Air Temperature For Operation:
-10-40 °C without derating || 40-60 °C with current derating 2.2 % per °C
  • Schneider Electric ATV12H037F1 Atv12 0.37Kw 120V 1Ph Heat Sink Tb
  • Schneider Electric ATV12H037F1 Atv12 0.37Kw 120V 1Ph Heat Sink Tb
  • Schneider Electric ATV12H037F1 Atv12 0.37Kw 120V 1Ph Heat Sink Tb
$287.64

Description

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.37kW / 0.5hp and a rated voltage from 100V to 120V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings.
View AllClose