Schneider Electric ATV12P037F1 Atv12 0.37Kw 120V 1Ph Base Plate Tb
Schneider Electric
$287.64
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATV12P037F1 Atv12 0.37Kw 120V 1Ph Base Plate Tb
Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. The drive can feed single-phase asynchronous motors. It works at a rated power up to 0.37kW (0.55HP), and a rated voltage from 100V to 120V. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. It weighs 0.7kg. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, thus reducing maintenance downtime. This reference is sold individually. ATV12 can be installed alone or side by side in a multi-drive configuration. The ATV12 range meets basic machine requirements united with simplicity.
- Quantity Per Set:
- set of 1
- Electromagnetic Compatibility:
- electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || electrostatic discharge immunity test level 3 IEC 61000-4-2 || immunity to conducted disturbances level 3 IEC 61000-4-6 || radiated radio-frequency electromagnetic field immunity
- Depth:
- 102.2 mm
- Electromagnetic Emission:
- radiated emissions environment 1 category C2 IEC 61800-3 2...16 kHz shielded motor cable || conducted emissions with additional EMC filter environment 1 category C1 IEC 61800-3 4...12 kHz shielded motor cable <5 m || conducted emissions with addition
- Nominal Switching Frequency:
- 4 kHz
- 4 Quadrant Operation Possible:
- FALSE
- Discrete Output Number:
- 2
- Maximum Deflection Under Vibratory Load (During Operation):
- 1.5 mm at 2...13 Hz
- Operating Altitude:
- > 3280.84...6561.68 ft (> 1000...2000 m) with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
- Operating Position:
- vertical +/- 10 degree
- Acceleration And Deceleration Ramps:
- S || linear from 0 to 999.9 s || U
- Maximum Output Frequency:
- 4 kHz
- [Us] Rated Supply Voltage:
- 100...120 V - 15...10 %
- Supply Frequency:
- 50/60 Hz +/- 5 %
- Product Certifications:
- NOM || CSA || C-tick || UL || GOST || RCM || KC
- With Safety Function Safe Stop 1 (Ss1):
- FALSE
- Maximum Horse Power Rating:
- 0.55 hp
- Pollution Degree:
- 2
- Speed Drive Output Frequency:
- 0.5-400 Hz
- Method Of Access:
- server Modbus serial
- Braking To Standstill:
- by DC injection
- Prospective Line Isc:
- 1 kA
- Tightening Torque:
- 0.8 N.m
- Network Frequency:
- 50-60 Hz
- Environmental Class (During Operation):
- class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
- Number Of Addresses:
- 1-247
- With Safety Function Safe Direction (Sdi):
- FALSE
- Transmission Rate:
- 9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
- With Sft Fct Safe Stop 2 (Ss2):
- FALSE
- Brake Chopper Integrated:
- FALSE
- Height:
- 143 mm
- Shock Resistance:
- 15 gn 11 ms IEC 60068-2-27
- With Safety Function Safe Programmable Logic:
- FALSE
- Regulation Loop:
- adjustable PID regulator
- Asynchronous Motor Control Profile:
- quadratic voltage/frequency ratio || voltage/frequency ratio (V/f) || sensorless flux vector control
- Emc Filter:
- without EMC filter
- Protection Type:
- line supply overvoltage || line supply undervoltage || overcurrent between output phases and earth || overheating protection || short-circuit between motor phases || against input phase loss in three-phase || thermal motor protection via the drive by
- Product Or Component Type:
- variable speed drive
- Product Specific Application:
- simple machine
- Insulation:
- electrical between power and control
- Analogue Output Number:
- 1
- Ambient Air Transport Temperature:
- -25-70 °C
- Vibration Resistance:
- 1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz) - drive unmounted on symmetrical DIN rail - IEC 60068-2-6
- China Rohs Regulation:
- X
- Maximum Output Voltage:
- 240 V
- Communication Service:
- read holding registers (03) 29 words || write single register (06) 29 words || write multiple registers (16) 27 words || read/write multiple registers (23) 4/4 words || read device identification (43)
- With Safety Function Safe Brake Management (Sbc/Sbt):
- FALSE
- Ambient Air Temperature For Operation:
- -10-40 °C without derating || 40-60 °C with current derating 2.2 % per °C
- Motor Power Kw:
- 0.37 kW
- Sampling Duration:
- 20 ms +/- 1 ms logic input || 10 ms analogue input
- Power Dissipation In W:
- natural 29.0 W
- Relative Humidity:
- 5-95 % without condensation IEC 60068-2-3 || 5-95 % without dripping water IEC 60068-2-3
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Type Of Polarization:
- no impedance
- Time Constant:
- 20 ms +/- 1 ms for reference change
- Line Current:
- 11.4 A 100 V heavy duty) || 9.3 A 120 V heavy duty)
- Maximum Acceleration Under Vibrational Stress (During Operation):
- 10 m/s² at 13...200 Hz
- Maximum Acceleration Under Shock Impact (During Operation):
- 150 m/s² at 11 ms
- Speed Range:
- 45311
- With Safety Function Safe Operating Stop (Sos):
- FALSE
- Net Weight:
- 0.7 kg
- Relay Output Number:
- 1
- Transient Overtorque:
- 150-170 % of nominal motor torque depending on drive rating and type of motor
- Apparent Power:
- 1.1 kVA 240 V heavy duty)
- Marking:
- CE
- Warranty:
- 18 months
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- With Safety Function Safely Limited Speed (Sls):
- FALSE
- Communication Port Protocol:
- Modbus
- Continuous Output Current:
- 2.4 A 4 kHz
- Data Format:
- 8 bits, configurable odd, even or no parity
- Maximum Transient Current:
- 3.6 A 60 s heavy duty) || 4.0 A 2 s heavy duty)
- Switching Frequency:
- 2...16 kHz adjustable || 4...16 kHz with derating factor
- Transmission Frame:
- RTU
- Connector Type:
- 1 RJ45
- With Safety Function Safe Position (Sp):
- FALSE
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Physical Interface:
- 2-wire RS 485
- Frequency Resolution:
- analog input converter A/D, 10 bits || display unit 0.1 Hz
- Analogue Input Number:
- 1
- Overvoltage Category:
- class III
- Assembly Style:
- on base plate
- Width:
- 72 mm
- Ambient Air Temperature For Storage:
- -25-70 °C
- Mounting Mode:
- cabinet mount
- Range Of Product:
- Altivar 12
- Rohs Exemption Information:
- Yes
- Standards:
- UL 508C || UL 618000-5-1 || IEC 61800-5-1 || IEC 61800-3
- Mercury Free:
- Yes
- Discrete Input Number:
- 4
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Relative Symmetric Network Frequency Tolerance:
- 0.05
- Ip Degree Of Protection:
- IP20
- Motor Slip Compensation:
- adjustable || preset in factory
- Linearity Error:
- +/- 0.3 % of maximum value analogue input
- Noise Level:
- 0 dB
- Base Load Current At High Overload:
- 2.4 A
- With Safety Function Safe Speed Monitor (Ssm):
- FALSE
- Nominal Output Current:
- 2.4 A
- With Safety Function Safely Limited Position (Slp):
- FALSE
- With Safety Function Safe Torque Off (Sto):
- FALSE
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View
