Schneider Electric

Schneider Electric ATV320D15N4B Atv320 Book 15Kw - 3Ph - 380/500V

(No reviews yet) Write a Review
SKU:
ATV320D15N4B
UPC:
3.60648E+12
Condition:
New
Prospective Line Isc:
22 kA
With Safety Function Safely Limited Position (Slp):
FALSE
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Discrete Input Type:
STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
Product Specific Application:
complex machines
Operating Position:
vertical +/- 10 degree
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
Braking To Standstill:
by DC injection
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Analogue Input Number:
3
Network Frequency:
50-60 Hz
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Apparent Power:
28.8 kVA 500 V heavy duty)
Transient Overtorque:
170-200 % of nominal motor torque
Net Weight:
6.9 kg
Emc Filter:
class C3 EMC filter integrated
Minimum Switching Current:
relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
Discrete Input Number:
7
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Upgradeability:
Upgraded components available
Protection Type:
input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
[Us] Rated Supply Voltage:
380...500 V - 15...10 %
Speed Accuracy:
+/- 10 % of nominal slip 0.2 Tn to Tn
Relay Output Type:
configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
Line Current:
47.3 A 380 V heavy duty) || 33.3 A 500 V heavy duty)
With Safety Function Safe Position (Sp):
FALSE
Discrete Output Number:
3
Communication Port Protocol:
Modbus serial || CANopen
Product Or Component Type:
variable speed drive
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Standards:
IEC 61800-5-1
Product Certifications:
CE || ATEX || NOM || GOST || EAC || RCM || KC
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Method Of Access:
slave CANopen
Pollution Degree:
2
Maximum Switching Current:
relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C
Regulation Loop:
adjustable PID regulator
Nominal Output Current:
33.0 A
Volume Of Cooling Air:
156.0 m3/h
China Rohs Regulation:
X
Maximum Output Voltage:
500 V
Mounting Mode:
wall mount
Base Load Current At High Overload:
0.166666666666667
Discrete Input Logic:
positive logic (source) || negative logic (sink)
Maximum Output Frequency:
0.599 kHz
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Mercury Free:
Yes
Variant:
standard version
Ambient Air Transport Temperature:
-25-70 °C
Ip Degree Of Protection:
IP20
Option Card:
communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device
Ambient Air Temperature For Storage:
-25-70 °C
With Safety Function Safely Limited Speed (Sls):
TRUE
With Safety Function Safe Stop 1 (Ss1):
TRUE
Nominal Switching Frequency:
4 kHz
Motor Power Kw:
15.0 kW heavy duty
Marking:
CE || ATEX || UL || CSA || EAC || RCM
Circularity Profile:
ENVEOLI1709006EN_V1
Analogue Input Type:
AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
Discrete Output Type:
open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
Range Of Product:
Altivar Machine ATV320
Depth:
232.0 mm
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Asynchronous Motor Control Profile:
voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
Acceleration And Deceleration Ramps:
linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
With Safety Function Safe Direction (Sdi):
FALSE
Synchronous Motor Control Profile:
vector control without sensor
With Safety Function Safe Torque Off (Sto):
TRUE
Relative Symmetric Network Frequency Tolerance:
0.05
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Sustainable Offer Status:
Green Premium product
Ambient Air Temperature For Operation:
-10-50 °C without derating || 50-60 °C with derating factor
Environmental Disclosure:
ENVPEP1709006EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Height:
404.0 mm
With Safety Function Safe Operating Stop (Sos):
FALSE
4 Quadrant Operation Possible:
TRUE
Overvoltage Category:
III
With Safety Function Safe Programmable Logic:
FALSE
Analogue Output Number:
1
Width:
180 mm
Motor Slip Compensation:
automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
Rohs Exemption Information:
Yes
Power Dissipation In W:
fan 452.0 W 380 V 4 kHz
Format Of The Drive:
book
Brake Chopper Integrated:
TRUE
Analogue Output Type:
software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
Brochure:
View
Catalog:
View
Datasheet:
View
$2,581.50

Description

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 15kW / 20hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
View AllClose