null
Schneider Electric ATV320U22M3C Atv320 2,2Kw 200V 3Ph Compact Control Va

Schneider Electric ATV320U22M3C Atv320 2,2Kw 200V 3Ph Compact Control Va

Schneider Electric
SKU:
ATV320U22M3C
|
UPC:
3606480966644
$717.00
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 2.2kW / 3hp and a rated voltage from 200V to 240V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It weighs 1.4kg and its dimensions are 105mm wide, 143mm high, 138mm deep. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to IEC, UL, TUV, KC and other international standards. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. The product is delivered in two packages. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.
Additional Information
Acceleration And Deceleration Ramps:
linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
Option Card:
communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device
Communication Port Protocol:
Modbus serial || CANopen
Analogue Input Type:
AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
Discrete Output Type:
open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Power Dissipation In W:
fan 91 W 200 V 4 kHz
Asynchronous Motor Control Profile:
voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
Mounting Mode:
wall mount
Rohs Exemption Information:
Yes
[Us] Rated Supply Voltage:
200...240 V - 15...10 %
Pollution Degree:
2
Method Of Access:
slave CANopen
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP1512003EN
Nominal Switching Frequency:
4 kHz
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Product Or Component Type:
variable speed drive
Transient Overtorque:
170-200 % of nominal motor torque
Minimum Switching Current:
relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
Regulation Loop:
adjustable PID regulator
Motor Slip Compensation:
automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
Maximum Output Frequency:
0.599 kHz
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Synchronous Motor Control Profile:
vector control without sensor
Format Of The Drive:
compact
Ambient Air Temperature For Storage:
-25-70 °C
Product Specific Application:
complex machines
With Safety Function Safe Torque Off (Sto):
TRUE
Maximum Output Voltage:
240 V
Discrete Input Logic:
positive logic (source) || negative logic (sink)
With Safety Function Safe Stop 1 (Ss1):
TRUE
Braking To Standstill:
by DC injection
Maximum Switching Current:
relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C
Analogue Output Number:
1
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Analogue Input Number:
3
With Safety Function Safely Limited Position (Slp):
FALSE
Circularity Profile:
ENVEOLI1512003EN
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Base Load Current At High Overload:
3.7 A
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
Upgradeability:
Upgraded components available
China Rohs Regulation:
X
Depth:
138.0 mm
Discrete Input Number:
7
Sustainable Offer Status:
Green Premium product
Analogue Output Type:
software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
Line Current:
14.9 A 200 V heavy duty) || 12.5 A 240 V heavy duty)
Network Frequency:
50-60 Hz
Standards:
IEC 61800-5-1
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
With Safety Function Safe Direction (Sdi):
FALSE
Ambient Air Transport Temperature:
-25-70 °C
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Volume Of Cooling Air:
14.8 m3/h
Speed Accuracy:
+/- 10 % of nominal slip 0.2 Tn to Tn
Ambient Air Temperature For Operation:
-10-50 °C without derating || 50-60 °C with derating factor
Ip Degree Of Protection:
IP20
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
Operating Position:
vertical +/- 10 degree
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Discrete Output Number:
3
Protection Type:
input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
With Safety Function Safe Programmable Logic:
FALSE
With Safety Function Safe Operating Stop (Sos):
FALSE
Relative Symmetric Network Frequency Tolerance:
0.05
Prospective Line Isc:
5 kA
Height:
143.0 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
With Safety Function Safely Limited Speed (Sls):
TRUE
Apparent Power:
5.2 kVA 240 V heavy duty)
Marking:
CE || ATEX || UL || CSA || EAC || RCM
Motor Power Kw:
2.2 kW heavy duty
Net Weight:
1.4 kg
Discrete Input Type:
STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
Variant:
standard version
4 Quadrant Operation Possible:
TRUE
Overvoltage Category:
III
Product Certifications:
CE || ATEX || NOM || GOST || EAC || RCM || KC
Brake Chopper Integrated:
TRUE
With Safety Function Safe Position (Sp):
FALSE
Emc Filter:
without EMC filter
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Nominal Output Current:
11.0 A
Width:
105.0 mm
Relay Output Type:
configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
Range Of Product:
Altivar Machine ATV320
Brochure:
View
Catalog:
View
Datasheet:
View
Related Products