Schneider Electric ATV320U40N4B Atv320 Book 4Kw - 3Ph - 380/500V

(No reviews yet) Write a Review
SKU:
ATV320U40N4B
UPC:
3606480931284
Condition:
New
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Regulation Loop:
adjustable PID regulator
Circularity Profile:
ENVEOLI1711005EN
With Safety Function Safely Limited Speed (Sls):
TRUE
Environmental Disclosure:
ENVPEP1711005EN
Maximum Output Voltage:
500 V
Maximum Output Frequency:
0.599 kHz
Discrete Output Type:
open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
Rohs Exemption Information:
Yes
Analogue Output Number:
1
Brake Chopper Integrated:
TRUE
Analogue Output Type:
software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
Emc Filter:
Class C2 EMC filter integrated
Depth:
245.0 mm
Speed Accuracy:
+/- 10 % of nominal slip 0.2 Tn to Tn
Protection Type:
input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
Variant:
standard version
China Rohs Regulation:
X
Prospective Line Isc:
5 kA
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Pollution Degree:
2
With Safety Function Safe Direction (Sdi):
FALSE
Overvoltage Category:
III
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Height:
325.0 mm
Line Current:
13.7 A 380 V heavy duty) || 10.5 A 500 V heavy duty)
Net Weight:
3.0 kg
Nominal Output Current:
9.5 A
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Maximum Switching Current:
relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C
Transient Overtorque:
170-200 % of nominal motor torque
Braking To Standstill:
by DC injection
Operating Position:
vertical +/- 10 degree
Product Or Component Type:
variable speed drive
Ambient Air Temperature For Storage:
-25-70 °C
Discrete Input Number:
7
Discrete Input Logic:
positive logic (source) || negative logic (sink)
With Safety Function Safe Operating Stop (Sos):
FALSE
Discrete Input Type:
STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
Minimum Switching Current:
relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
Analogue Input Type:
AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
Ip Degree Of Protection:
IP20
Method Of Access:
slave CANopen
Mercury Free:
Yes
Communication Port Protocol:
Modbus serial || CANopen
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Option Card:
communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device
With Safety Function Safe Stop 1 (Ss1):
TRUE
Upgradeability:
Upgraded components available
With Safety Function Safe Torque Off (Sto):
TRUE
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Switching Frequency:
4 kHz
Motor Power Kw:
4.0 kW heavy duty
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Relative Symmetric Network Frequency Tolerance:
0.05
Network Frequency:
50-60 Hz
4 Quadrant Operation Possible:
TRUE
Discrete Output Number:
3
Standards:
IEC 61800-5-1
Motor Slip Compensation:
automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
Ambient Air Transport Temperature:
-25-70 °C
With Safety Function Safe Position (Sp):
FALSE
Relay Output Type:
configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
Volume Of Cooling Air:
11.3 m3/h
Synchronous Motor Control Profile:
vector control without sensor
Power Dissipation In W:
fan 111 W 380 V 4 kHz
Acceleration And Deceleration Ramps:
linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
Asynchronous Motor Control Profile:
voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
Base Load Current At High Overload:
9.5 A
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
With Safety Function Safe Programmable Logic:
FALSE
Analogue Input Number:
3
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Range Of Product:
Altivar Machine ATV320
Width:
60 mm
Apparent Power:
9.1 kVA 500 V heavy duty)
Product Certifications:
CE || ATEX || NOM || GOST || EAC || RCM || KC
Marking:
CE || ATEX || UL || CSA || EAC || RCM
Mounting Mode:
cabinet mount
[Us] Rated Supply Voltage:
380...500 V - 15...10 %
Product Specific Application:
complex machines
Ambient Air Temperature For Operation:
-10-50 °C without derating || 50-60 °C with derating factor
Format Of The Drive:
book
With Safety Function Safely Limited Position (Slp):
FALSE
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Sustainable Offer Status:
Green Premium product
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric ATV320U40N4B Atv320 Book 4Kw - 3Ph - 380/500V
  • Schneider Electric ATV320U40N4B Atv320 Book 4Kw - 3Ph - 380/500V
  • Schneider Electric ATV320U40N4B Atv320 Book 4Kw - 3Ph - 380/500V
$1,093.50

Description

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 4kW / 5hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
View AllClose