Schneider Electric ATV320U75N4B Atv320 Book 7.5Kw - 3Ph - 380/500V
Schneider Electric
$1,578.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATV320U75N4B Atv320 Book 7.5Kw - 3Ph - 380/500V
This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 7.5kW / 10hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.
- Maximum Deflection Under Vibratory Load (During Operation):
- 1.5 mm at 2...13 Hz
- Permitted Relative Humidity (During Operation):
- class 3K5 according to EN 60721-3
- With Sft Fct Safe Stop 2 (Ss2):
- FALSE
- Apparent Power:
- 16.2 kVA 500 V heavy duty)
- Electromagnetic Compatibility:
- electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
- Volume Of Cooling Air:
- 60 m3/h
- Analogue Input Number:
- 3
- Analogue Output Number:
- 1
- With Safety Function Safe Operating Stop (Sos):
- FALSE
- With Safety Function Safely Limited Position (Slp):
- FALSE
- Nominal Switching Frequency:
- 4 kHz
- Maximum Acceleration Under Vibrational Stress (During Operation):
- 10 m/s² at 13...200 Hz
- Circularity Profile:
- ENVEOLI1708004EN
- Discrete Output Number:
- 3
- Mercury Free:
- Yes
- Speed Accuracy:
- +/- 10 % of nominal slip 0.2 Tn to Tn
- Format Of The Drive:
- book
- With Safety Function Safe Brake Management (Sbc/Sbt):
- FALSE
- With Safety Function Safely Limited Speed (Sls):
- TRUE
- Prospective Line Isc:
- 22 kA
- Sustainable Offer Status:
- Green Premium product
- Discrete Input Logic:
- positive logic (source) || negative logic (sink)
- Maximum Acceleration Under Shock Impact (During Operation):
- 150 m/s² at 11 ms
- Power Dissipation In W:
- fan 229.0 W 380 V 4 kHz
- Synchronous Motor Control Profile:
- vector control without sensor
- Ip Degree Of Protection:
- IP20
- Asynchronous Motor Control Profile:
- voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
- Nominal Output Current:
- 17.0 A
- Maximum Switching Current:
- relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C
- Marking:
- CE || ATEX || UL || CSA || EAC || RCM
- With Safety Function Safe Position (Sp):
- FALSE
- Transient Overtorque:
- 170-200 % of nominal motor torque
- Mounting Mode:
- wall mount
- Ambient Air Temperature For Storage:
- -25-70 °C
- Analogue Input Type:
- AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
- With Safety Function Safe Programmable Logic:
- FALSE
- With Safety Function Safe Speed Monitor (Ssm):
- FALSE
- Operating Position:
- vertical +/- 10 degree
- Base Load Current At High Overload:
- 17.0 A
- Network Frequency:
- 50-60 Hz
- Brake Chopper Integrated:
- TRUE
- Discrete Input Number:
- 7
- Ambient Air Temperature For Operation:
- -10-50 °C without derating || 50-60 °C with derating factor
- Motor Power Kw:
- 7.5 kW heavy duty
- 4 Quadrant Operation Possible:
- TRUE
- Standards:
- IEC 61800-5-1
- Line Current:
- 26.5 A 380 V heavy duty) || 18.7 A 500 V heavy duty)
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Option Card:
- communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device
- Switching Frequency:
- 2...16 kHz adjustable || 4...16 kHz with derating factor
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Width:
- 150 mm
- Upgradeability:
- Upgraded components available
- With Safety Function Safe Stop 1 (Ss1):
- TRUE
- Product Specific Application:
- complex machines
- Regulation Loop:
- adjustable PID regulator
- [Us] Rated Supply Voltage:
- 380...500 V - 15...10 %
- Braking To Standstill:
- by DC injection
- Maximum Output Frequency:
- 0.599 kHz
- Analogue Output Type:
- software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
- Environmental Class (During Operation):
- class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
- Height:
- 308.0 mm
- Depth:
- 232.0 mm
- Minimum Switching Current:
- relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
- Variant:
- standard version
- Protection Type:
- input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
- With Safety Function Safe Torque Off (Sto):
- TRUE
- Rohs Exemption Information:
- Yes
- Product Certifications:
- CE || ATEX || NOM || GOST || EAC || RCM || KC
- Emc Filter:
- Class C2 EMC filter integrated
- Range Of Product:
- Altivar Machine ATV320
- Acceleration And Deceleration Ramps:
- linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
- Discrete Input Type:
- STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
- Relay Output Type:
- configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
- Product Or Component Type:
- variable speed drive
- China Rohs Regulation:
- X
- Method Of Access:
- slave CANopen
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Discrete Output Type:
- open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
- Communication Port Protocol:
- Modbus serial || CANopen
- Ambient Air Transport Temperature:
- -25-70 °C
- Pollution Degree:
- 2
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Overvoltage Category:
- III
- Net Weight:
- 4.4 kg
- Environmental Disclosure:
- ENVPEP1708004EN
- Motor Slip Compensation:
- automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
- Relative Symmetric Network Frequency Tolerance:
- 0.05
- With Safety Function Safe Direction (Sdi):
- FALSE
- Maximum Output Voltage:
- 500 V
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View
