Schneider Electric ATV340D11N4 Atv340 11Kw 15Hp 400V Wo Ethernet Variab

(No reviews yet) Write a Review
SKU:
ATV340D11N4
UPC:
3606480966941
Condition:
New
Brake Chopper Integrated:
TRUE
Electrical Connection:
control screw terminal 0.2...2.5 mm² AWG 24...AWG 12 || line side screw terminal 4...25 mm² AWG 10...AWG 3 || DC bus screw terminal 4...25 mm² AWG 10...AWG 3 || motor screw terminal 2.5...25 mm² AWG 12...AWG 3
Base Load Current At High Overload:
24.0 A
Electrical Connection:
screw terminal 0.2...2.5 mm² control || screw terminal 4...25 mm² line side || screw terminal 4...25 mm² DC bus || screw terminal 2.5...25 mm² motor
Ambient Air Transport Temperature:
-40-70 °C
Overvoltage Category:
class III
Height:
385.0 mm
Data Format:
8 bits, configurable odd, even or no parity
Net Weight:
9.5 kg
Assembly Style:
with heat sink
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
Maximum Transient Current:
35.2 A 60 s normal duty) || 36 A 60 s heavy duty) || 43.2 A 2 s normal duty) || 43 A 2 s heavy duty)
Connector Type:
1 RJ45
Mercury Free:
Yes
Apparent Power:
22.7 kVA 480 V normal duty) || 23 kVA 480 V heavy duty)
Line Current:
28.8 A 380 V normal duty) || 23.0 A 480 V normal duty) || 34.7 A 380 V heavy duty) || 27.7 A 480 V heavy duty)
With Safety Function Safe Direction (Sdi):
FALSE
Phase:
3 phase
Environmental Disclosure:
ENVPEP1609006EN
Analogue Output Type:
software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1 0...20 mA 500 Ohm 10 bits
Ambient Air Temperature For Operation:
-15-50 °C without derating vertical position) || 50-60 °C with derating factor vertical position)
4 Quadrant Operation Possible:
TRUE
Product Certifications:
UL || CSA || TÜV || EAC || CTick
Physical Interface:
2-wire RS 485
Width:
180.0 mm
Depth:
249.0 mm
With Safety Function Safe Torque Off (Sto):
TRUE
Maximum Acceleration Under Shock Impact (During Operation):
70 m/s² at 22 ms
Continuous Output Current:
32 A 4 kHz normal duty || 24 A 4 kHz heavy duty
Noise Level:
55.6 dB
Discrete Output Number:
2
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Operating Altitude:
<= 9842.52 ft (3000 m) with current derating above 1000m
Acceleration And Deceleration Ramps:
linear adjustable separately from 0.01...9999 s || S, U or customized
Circularity Profile:
ENVEOLI1609006EN
Ambient Air Temperature For Storage:
-40-70 °C
Mounting Mode:
cabinet mount
Analogue Output Number:
2
Communication Port Protocol:
Modbus serial
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...9 Hz
Analogue Input Type:
AI1 software-configurable current 0...20 mA 250 Ohm 12 bits || AI1 software-configurable temperature probe or water level sensor || AI1 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI2 software-configurable voltage - 10...10 V DC 31
Synchronous Motor Control Profile:
permanent magnet motor || reluctance motor
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Output Voltage:
<= power supply voltage
Variant:
standard version
Product Or Component Type:
variable speed drive
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Analogue Input Number:
2
Transmission Frame:
RTU
Maximum Output Voltage:
480 V
With Safety Function Safely Limited Position (Slp):
FALSE
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3
Standards:
IEC 61800-3 || IEC 61800-5-1 || IEC 60721-3 || IEC 61508 || IEC 13849-1 || UL 618000-5-1 || UL 508C
Discrete Input Logic:
16 preset speeds
Minimum Switching Current:
relay output R1B 5 mA 24 V DC || relay output R2C 5 mA 24 V DC
With Safety Function Safely Limited Speed (Sls):
TRUE
With Safety Function Safe Position (Sp):
FALSE
Supply Frequency:
50...60 Hz +/- 5 %
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Relay Output Type:
relay outputs R1A || relay outputs R1C 100000 cycles || relay outputs R2A || relay outputs R2C 100000 cycles
Option Card:
communication module, Profibus DP V1 || communication module, PROFINET || communication module, DeviceNet || communication module, CANopen || communication module, EtherCAT
Rohs Exemption Information:
Yes
Discrete Input Number:
5
Power Dissipation In W:
natural convection 13 W 380 V 4 kHz heavy duty) || forced convection 241 W 380 V 4 kHz heavy duty) || natural convection 16 W 380 V 4 kHz normal duty) || forced convection 311 W 380 V 4 kHz normal duty)
Ip Degree Of Protection:
IP20
Regulation Loop:
adjustable PID regulator
Braking To Standstill:
by DC injection
Number Of Addresses:
1-247
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
Operating Position:
vertical +/- 10 degree
Marking:
CE
With Safety Function Safe Stop 1 (Ss1):
TRUE
Maximum Switching Current:
relay output R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R
Type Of Polarization:
no impedance
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Horse Power Rating:
20 hp normal duty || 15 hp heavy duty
China Rohs Regulation:
X
Sustainable Offer Status:
Green Premium product
Transmission Rate:
4.8 kbit/s || 9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
Motor Power Kw:
15 kW normal duty || 11 kW heavy duty
Isolation:
between power and control terminals
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Output Frequency:
0.599 kHz
Nominal Output Current:
24.0 A
Product Specific Application:
machine
Motor Slip Compensation:
not available in permanent magnet motor law || adjustable || can be suppressed || automatic whatever the load
Prospective Line Isc:
22 kA
Maximum Acceleration Under Vibrational Stress (During Operation):
5 m/s² at 9...200 Hz
Volume Of Cooling Air:
128.0 m3/h
Relay Output Number:
2
Pollution Degree:
2
Protection Type:
thermal protection motor || safe torque off motor || motor phase loss motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent drive || output overcurrent between motor phase and earth drive || output overcurrent
Base Load Current At Low Overload:
32.0 A
Pollution Degree:
2 IEC 61800-5-1
Type Of Cooling:
forced convection
Upgradeability:
Upgraded components available
Asynchronous Motor Control Profile:
optimized torque mode || variable torque standard || constant torque standard
Discrete Input Type:
PTI programmable as pulse input 0-30 kHz, 24 V DC 30 V) || DI1...DI5 programmable, 24 V DC 30 V)3.5 kOhm
Nominal Switching Frequency:
4 kHz
With Safety Function Safe Operating Stop (Sos):
FALSE
Method Of Access:
slave Modbus RTU
Range Of Product:
Altivar Machine ATV340
With Safety Function Safe Programmable Logic:
FALSE
With Safety Function Safe Brake Management (Sbc/Sbt):
TRUE
Emc Filter:
class C3 EMC filter integrated
Discrete Output Type:
programmable output DQ1, DQ2 30 V DC 100 mA
Line Current:
34.7 A 380 V without line choke heavy duty) || 27.7 A 480 V without line choke heavy duty) || 33.9 A 380 V with external line choke normal duty) || 27.2 A 480 V with external line choke normal duty) || 35.1 A 380 V with external line choke heavy duty
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Brochure:
View
Catalog:
View
Datasheet:
View
$2,432.43

Description

This Altivar 340 variable speed drive can feed 3-phase synchronous and asynchronous motors in open and closed loop control. Altivar Machine ATV340 drives are sized heavy duty as standard. It works at a rated power up to 11kW / 15hp and a rated voltage from 380V to 480V AC. ATV340 has been designed to meet the needs of applications for harsh environments, such as vibration, shock and non-conductive dust and where high temperature resistance up to 60 °C is needed. This product integrates Modbus serial line communication protocols as standard. it weighs 9.5kg and its dimensions are, 180mm wide, 385mm high, 249mm deep. ATV340 incorporates functions and features suitable for the most common applications, including packaging, material handling, material working, hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories and options (encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters) are available with Altivar Machine ATV340 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV340 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
View AllClose