DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm
Relative Symmetric Network Frequency Tolerance:
0.05
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Acceleration And Deceleration Ramps:
S, U or customized || linear adjustable separately from 0.01...9999 s
Upgradeability:
Upgraded components available
Exchange Mode:
half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Electrical Connection:
control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 25...50 mm² AWG 4...AWG 1 || motor screw terminal 25...50 mm² AWG 4...AWG 1 || DC bus screw terminal 25...50 mm² AWG 4...AWG 1
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Line Current:
55.6 A 500 V normal duty) || 47.2 A 500 V heavy duty) || 54.4 A 690 V normal duty) || 46.2 A 690 V heavy duty)
Data Format:
8 bits, configurable odd, even or no parity
Pollution Degree:
2
Ambient Air Temperature For Storage:
-40-70 °C
Sampling Duration:
2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output
Product Or Component Type:
variable speed drive
With Safety Function Safely Limited Position (Slp):
FALSE
Maximum Output Frequency:
599 Hz
Maximum Output Voltage:
690.0 V
Analogue Output Number:
2
Analogue Input Type:
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
With Safety Function Safe Programmable Logic:
FALSE
Synchronous Motor Control Profile:
permanent magnet motor || synchronous reluctance motor
Rohs Exemption Information:
Yes
Overvoltage Category:
III
Number Of Addresses:
1-247 Modbus serial
Switching Frequency:
1...4.9 kHz adjustable || 2.5...4.9 kHz with derating factor
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
Local Signalling:
local diagnostic 3 LED mono/dual colour) || presence of voltage 1 LED red) || embedded communication status 3 LED dual colour) || communication module status 4 LED dual colour)
Marking:
CE
Mounting Mode:
wall mount
Quantity Per Set:
1
Analogue Input Number:
3
Product Certifications:
CSA || UL || TÃV
With Safety Function Safely Limited Speed (Sls):
TRUE
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Communication Port Protocol:
EtherNet/IP || Modbus serial || Modbus TCP
Emc Filter:
integrated || with EMC plate option
Discrete Input Logic:
16 preset speeds
Type Of Polarization:
no impedance Modbus serial
Net Weight:
53 kg
Isolation:
between power and control terminals
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Connector Type:
2 RJ45 || 1 RJ45
Ip Degree Of Protection:
IP21
Protection Type:
thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c
Maximum Transient Current:
66 A 60 s normal duty) || 67.5 A 60 s heavy duty)
Height:
630 mm
Discrete Output Number:
2
Method Of Access:
slave Modbus TCP
Product Destination:
asynchronous motors || synchronous motors
Analogue Output Type:
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits
chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3
Data Format:
8 bits, configurable odd, even or no parity Modbus serial
Degree Of Protection:
UL type 1
Regulation Loop:
adjustable PID regulator
Number Of Addresses:
1-247
With Safety Function Safe Operating Stop (Sos):
FALSE
Type Of Polarization:
no impedance
Option Card:
slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module
Linearity Error:
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output
Circularity Profile:
ENVEOLI1706016EN
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m
Supply:
external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Asynchronous Motor Control Profile:
optimized torque mode || variable torque standard || constant torque standard
relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R
Discrete Output Type:
logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA