Schneider Electric BMH1001T17A1A Motor 100Mm Iec 3,4Nm Ip54 1350W Key
SKU:
BMH1001T17A1A
UPC:
3606485197142
MPN:
Condition:
New
Circle Diameter Of The Mounting Holes:
115 mm
Key Width:
30 mm
China Rohs Regulation:
X
Stator Inductance:
5.3 mH 20 °C
Rohs Exemption Information:
Yes
Net Weight:
3.34 kg
[Us] Rated Supply Voltage:
240 V
Maximum Current Irms:
15 A LXM32.D30M2 || 19.4 A LXM32.D18M2
Centring Collar Diameter:
95 mm
Stator Electrical Time Constant:
4.5 ms 20 °C
Nominal Output Power:
700 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Second Shaft:
without second shaft end
Warranty:
18 months
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP111002EN
Mounting Support:
international standard flange
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Shaft Diameter:
19 mm
Maximum Mechanical Speed:
6000 rpm
Shaft Length:
40 mm
Phase:
three phase
Number Of Mounting Holes:
4
Type Of Cooling:
natural convection
Pvc Free:
Yes
Holding Brake:
without
Number Of Motor Stacks:
1
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Or Component Type:
servo motor
Rotor Inertia:
3.19 kg.cm²
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ip Degree Of Protection:
IP54 standard
Mounting Holes Diameter:
9 mm
Feedback Type:
multiturn SinCos Hiperface
Peak Stall Torque:
8.9 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Number Of Motor Poles:
10
Nominal Torque:
3.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.8 N.m LXM32.D18M2 6 A, 230 V, single phase
Continuous Stall Current:
5.11 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Shaft End:
keyed
Maximum Permanent Current:
19.38 A
Electrical Connection:
straight connectors
Motor Flange Size:
100 mm
Device Short Name:
BMH
Stator Resistance:
1.19 Ohm 20 °C
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Centring Collar Depth:
3.5 mm
Length:
128.6 mm
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Continuous Power:
1.74 W
Back Emf Constant:
43.3 V/krpm 120 °C
Circularity Profile:
N/A
Mercury Free:
Yes
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
