Schneider Electric BMH1001T31A2A Motor 100Mm Iec 3,4Nm Ip65/67 1350W Key
SKU:
BMH1001T31A2A
UPC:
3606485200750
MPN:
Condition:
New
Back Emf Constant:
43.3 V/krpm 120 °C
Device Short Name:
BMH
Circle Diameter Of The Mounting Holes:
115 mm
Environmental Disclosure:
ENVPEP111002EN
Maximum Current Irms:
15 A LXM32.D30M2 || 19.4 A LXM32.D18M2
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Shaft Length:
40 mm
Feedback Type:
single turn SinCos Hiperface
Mercury Free:
Yes
Rotor Inertia:
3.19 kg.cm²
Range Compatibility:
Lexium 32
Number Of Mounting Holes:
4
Nominal Output Power:
700 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Circularity Profile:
N/A
Continuous Power:
1.74 W
Product Or Component Type:
servo motor
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Key Width:
30 mm
Motor Flange Size:
100 mm
Net Weight:
3.34 kg
Mounting Holes Diameter:
9 mm
Holding Brake:
without
Second Shaft:
without second shaft end
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
[Us] Rated Supply Voltage:
240 V
Phase:
three phase
Peak Stall Torque:
8.9 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Rohs Exemption Information:
Yes
China Rohs Regulation:
X
Stator Resistance:
1.19 Ohm 20 °C
Torque Constant:
0.67 N.m/A 120 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Mechanical Speed:
6000 rpm
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Pvc Free:
Yes
Maximum Axial Force Fa:
0.2 x Fr
Electrical Connection:
rotatable right-angled connectors
Shaft Diameter:
19 mm
Maximum Permanent Current:
19.38 A
Length:
128.6 mm
Mounting Support:
international standard flange
Sustainable Offer Status:
Green Premium product
Type Of Cooling:
natural convection
Centring Collar Depth:
3.5 mm
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Warranty:
18 months
Shaft End:
keyed
Number Of Motor Stacks:
1
Stator Electrical Time Constant:
4.5 ms 20 °C
Centring Collar Diameter:
95 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Stator Inductance:
5.3 mH 20 °C
Nominal Torque:
3.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.8 N.m LXM32.D18M2 6 A, 230 V, single phase
