Schneider Electric BMH1002P36A1A Motor 100Mm Iec 6,2Nm Ip65/67 2060W Key
SKU:
BMH1002P36A1A
UPC:
3606485196060
MPN:
Condition:
New
Centring Collar Depth:
3.5 mm
Range Compatibility:
Lexium 32
Rohs Exemption Information:
Yes
Mounting Support:
international standard flange
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Number Of Mounting Holes:
4
Continuous Stall Torque:
6.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 6.2 N.m LXM32.D18N4 6 A, 480 V, three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Second Shaft:
without second shaft end
Key Width:
30 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Us] Rated Supply Voltage:
480 V
Stator Electrical Time Constant:
5 ms 20 °C
Net Weight:
4.92 kg
Type Of Cooling:
natural convection
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Continuous Stall Current:
5.04 A
Motor Flange Size:
100 mm
Speed Feedback Resolution:
32768 points/turn
Nominal Torque:
3.9 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.9 N.m LXM32.D18N4 6 A, 480 V, three phase
Sustainable Offer Status:
Green Premium product
Nominal Speed:
4000 rpm LXM32.D18N4 6 A, 400 V, three phase || 4000 rpm LXM32.D18N4 6 A, 480 V, three phase
Nominal Output Power:
1600 W LXM32.D18N4 6 A, 400 V, three phase || 1600 W LXM32.D18N4 6 A, 480 V, three phase
Stator Resistance:
1.51 Ohm 20 °C
Maximum Mechanical Speed:
6000 rpm
Peak Stall Torque:
18.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 18.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Shaft Diameter:
19 mm
Feedback Type:
single turn SinCos Hiperface
Pvc Free:
Yes
Number Of Motor Stacks:
2
Shaft End:
keyed
Rotor Inertia:
6.28 kg.cm²
Length:
160.6 mm
Continuous Power:
2.36 W
Maximum Axial Force Fa:
0.2 x Fr
Maximum Permanent Current:
18.23 A
Circularity Profile:
N/A
Mounting Holes Diameter:
9 mm
Holding Brake:
without
Device Short Name:
BMH
Environmental Disclosure:
ENVPEP111002EN
Centring Collar Diameter:
95 mm
Electrical Connection:
straight connectors
Torque Constant:
1.2 N.m/A 120 °C
Stator Inductance:
7.5 mH 20 °C
Maximum Current Irms:
18 A LXM32.D18N4
Product Compatibility:
LXM32.D18N4 400...480 V three phase
Number Of Motor Poles:
10
Product Or Component Type:
servo motor
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Mercury Free:
Yes
Warranty:
18 months
Circle Diameter Of The Mounting Holes:
115 mm
China Rohs Regulation:
X
Back Emf Constant:
77 V/krpm 120 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
