Schneider Electric BMH1003T32F2A Motor 100Mm Iec 8,4Nm Ip65/67 2150W Key
SKU:
BMH1003T32F2A
UPC:
3606485197913
MPN:
Condition:
New
Shaft End:
keyed
Centring Collar Diameter:
95 mm
Continuous Stall Torque:
8.2 N.m LXM32.D30M2 10 A, 230 V, single phase
Nominal Output Power:
1450 W LXM32.D30M2 10 A, 230 V, single phase
Device Short Name:
BMH
Continuous Stall Current:
0.416666666666667
Pvc Free:
Yes
Sustainable Offer Status:
Green Premium product
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Holding Brake:
with
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 230 V, single phase
Mounting Holes Diameter:
9 mm
Rotor Inertia:
10.3 kg.cm²
Electrical Connection:
rotatable right-angled connectors
Maximum Mechanical Speed:
6000 rpm
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Inductance:
3 mH 20 °C
Nominal Torque:
5.6 N.m LXM32.D30M2 10 A, 230 V, single phase
Number Of Motor Stacks:
3
Length:
234.3 mm
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Product Compatibility:
LXM32.D30M2 230 V single phase
Peak Stall Torque:
22.8 N.m LXM32.D30M2 10 A, 230 V, single phase
Shaft Length:
40 mm
Mercury Free:
Yes
Phase:
three phase
Type Of Cooling:
natural convection
Shaft Diameter:
19 mm
Net Weight:
8.15 kg
Stator Resistance:
0.47 Ohm 20 °C
Brake Pull-In Power:
18 W
Environmental Disclosure:
ENVPEP111002EN
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
Motor Flange Size:
100 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Feedback Type:
multiturn SinCos Hiperface
Circle Diameter Of The Mounting Holes:
115 mm
Continuous Power:
2.62 W
Maximum Permanent Current:
33.85 A
Maximum Axial Force Fa:
0.2 x Fr
Torque Constant:
0.851 N.m/A 120 °C
Range Compatibility:
Lexium 32
Second Shaft:
without second shaft end
Number Of Mounting Holes:
4
Stator Electrical Time Constant:
6.4 ms 20 °C
Key Width:
30 mm
Maximum Current Irms:
30 A LXM32.D30M2
Holding Torque:
9 N.m holding brake
China Rohs Regulation:
X
Mounting Support:
international standard flange
Product Or Component Type:
servo motor
Circularity Profile:
N/A
Warranty:
18 months
Centring Collar Depth:
3.5 mm
Back Emf Constant:
54.8 V/krpm 120 °C
Rohs Exemption Information:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
