Schneider Electric

Schneider Electric BMH1401P32F1A Motor 140Mm Iec 10,3Nm Ip65/67 2640W

(No reviews yet) Write a Review
SKU:
BMH1401P32F1A
UPC:
3606485198316
Condition:
New
Product Compatibility:
LXM32.D30M2 230 V single phase || LXM32.D30N4 400...480 V three phase
Stator Resistance:
0.69 Ohm 20 °C
Key Width:
40 mm
Stator Electrical Time Constant:
9.7 ms 20 °C
Brake Pull-In Power:
18 W
Motor Flange Size:
140 mm
Shaft Length:
50 mm
Range Compatibility:
Lexium 32
[Us] Rated Supply Voltage:
480 V
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Output Power:
1450 W LXM32.D30M2 10 A, 230 V, single phase || 2400 W LXM32.D30N4 10 A, 400 V, three phase || 2400 W LXM32.D30N4 10 A, 480 V, three phase
Centring Collar Diameter:
130 mm
Phase:
three phase
Circularity Profile:
N/A
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Feedback Type:
multiturn SinCos Hiperface
Second Shaft:
without second shaft end
Maximum Permanent Current:
29.8 A
Back Emf Constant:
77.4 V/krpm 120 °C
Continuous Stall Current:
8.58 A
Length:
187 mm
Rotor Inertia:
17.96 kg.cm²
Maximum Radial Force Fr:
1930 N 1000 rpm || 1530 N 2000 rpm || 1340 N 3000 rpm
Pvc Free:
Yes
Nominal Torque:
6.9 N.m LXM32.D30M2 10 A, 230 V, single phase || 7.7 N.m LXM32.D30N4 10 A, 400 V, three phase || 7.7 N.m LXM32.D30N4 10 A, 480 V, three phase
Continuous Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 230 V, single phase || 10.3 N.m LXM32.D30N4 10 A, 400 V, three phase || 10.3 N.m LXM32.D30N4 10 A, 480 V, three phase
Circle Diameter Of The Mounting Holes:
165 mm
Mounting Support:
international standard flange
Type Of Cooling:
natural convection
Net Weight:
10.3 kg
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 230 V, single phase || 3000 rpm LXM32.D30N4 10 A, 400 V, three phase || 3000 rpm LXM32.D30N4 10 A, 480 V, three phase
Product Or Component Type:
servo motor
Number Of Motor Stacks:
1
Mounting Holes Diameter:
11 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Mounting Holes:
4
Stator Inductance:
6.7 mH 20 °C
Centring Collar Depth:
3.5 mm
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP111002EN
Electrical Connection:
straight connectors
Torque Constant:
1.2 N.m/A 120 °C
Warranty:
18 months
Number Of Motor Poles:
10
Rohs Exemption Information:
Yes
Mercury Free:
Yes
Holding Brake:
with
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Current Irms:
29.8 A LXM32.D30M2 || 29.8 A LXM32.D30N4
China Rohs Regulation:
X
Maximum Axial Force Fa:
0.2 x Fr
Holding Torque:
18 N.m holding brake
Continuous Power:
2.85 W
Peak Stall Torque:
30.8 N.m LXM32.D30M2 10 A, 230 V, single phase || 30.8 N.m LXM32.D30N4 10 A, 400 V, three phase || 30.8 N.m LXM32.D30N4 10 A, 480 V, three phase
Shaft Diameter:
24 mm
Maximum Mechanical Speed:
4000 rpm
Device Short Name:
BMH
Shaft End:
keyed
Datasheet:
View
$3,717.03

Description

servo motor BMH, Lexium 32, 10.3Nm, 4000rpm, keyed shaft, with brake, IP65, IP67, 128 multiturn encoder, straight
View AllClose