Schneider Electric BMI0703T36A Mot 1P 70Mm Ip65 640W Key Enc Sgt 16
SKU:
BMI0703T36A
UPC:
3606485376882
MPN:
Condition:
New
Number Of Motor Stacks:
3
Continuous Stall Current:
3.5 A
Ip Degree Of Protection:
IP65
Continuous Stall Torque:
3.4 N.m 115...230 V single phase
Key Width:
5 mm
Nominal Torque:
2.9 N.m 115 V single phase || 2.2 N.m 230 V single phase
Continuous Output Current:
3.5 A 8 kHz
Stator Inductance:
2.28 mH 20 °C
Circle Diameter Of The Mounting Holes:
75-82 mm
Nominal Output Power:
700 W 230 V single phase || 400 W 115 V single phase
Environmental Disclosure:
ENVPEP1312017EN
Distance Shaft Shoulder-Flange:
2.5 mm
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Back Emf Constant:
54.44 V/krpm 20 °C
Torque Constant:
0.81 N.m/A 20 °C
Type Of Cooling:
natural convection
Electrical Connection:
printed circuit board connector
Shaft Length:
30 mm
Output Current 3S Peak:
10.5 A 230 V 3 s
Pvc Free:
Yes
Number Of Motor Poles:
10
Warranty:
18 months
Shaft End:
keyed
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Speed Feedback Resolution:
32768 points/turn
Circularity Profile:
ENVEOLI1312017EN
Sustainable Offer Status:
Green Premium product
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Phase:
single phase
Holding Brake:
without
Rohs Exemption Information:
Yes
Mounting Support:
international standard flange
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Centring Collar Diameter:
60 mm
China Rohs Regulation:
X
Shaft Diameter:
14 mm
Stator Resistance:
2.58 Ohm 20 °C
Mounting Holes Diameter:
5.5 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Mechanical Speed:
8000 rpm
Emc Filter:
integrated
Supply Frequency:
50/60 Hz - 5...5 %
Maximum Axial Force Fa:
0.2 x Fr
Centring Collar Depth:
2.5 mm
Supply Voltage Limits:
100-240 V
Device Short Name:
BMI
Product Or Component Type:
servo motor with power stage
Peak Stall Torque:
8.6 N.m 115 V single phase || 8.6 N.m 230 V single phase
Maximum Current Irms:
17.8 A 115 V, single phase || 17.8 A 230 V, single phase
Network Frequency Limits:
47.5-63 Hz
Second Shaft:
without second shaft end
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Mounting Holes:
4
Nominal Speed:
3200 rpm 230 V single phase || 1400 rpm 115 V single phase
Motor Flange Size:
70 mm
Rotor Inertia:
1.67 kg.cm²
Mercury Free:
Yes
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
