
Schneider Electric BMI1002P17F Mot 3P 100Mm Ip54 1,9Kw Key Enc Mlt 16 B
Schneider Electric
$2,261.20
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
servo motor BMI 3-phase - keyed IP54 multiturn - 32768 p/t x 4096 t - brake
- Motor Flange Size:
- 100 mm
- Brake Pull-In Power:
- 8 W
- Product Compatibility:
- drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
- Circularity Profile:
- ENVEOLI1312017EN
- Continuous Stall Current:
- 0.166666666666667
- Second Shaft:
- without second shaft end
- Output Current 3S Peak:
- 12 A 400 V 3 s
- Nominal Speed:
- 1900 rpm 208 V three phase || 3800 rpm 400 V three phase || 4700 rpm 480 V three phase
- Warranty:
- 18 months
- Type Of Cooling:
- natural convection
- Shaft Length:
- 40 mm
- Product Or Component Type:
- servo motor with power stage
- Stator Resistance:
- 2.347 Ohm 20 °C
- Shaft End:
- keyed
- Speed Feedback Resolution:
- 32768 points/turn x 4096 turns
- Mounting Holes Diameter:
- 9 mm
- Phase:
- three phase
- Back Emf Constant:
- 84.52 V/krpm 20 °C
- Device Short Name:
- BMI
- Mounting Support:
- international standard flange
- Maximum Mechanical Speed:
- 6000 rpm
- Network Frequency Limits:
- 47.5-63 Hz
- Ip Degree Of Protection:
- shaft IP54 || housing IP65
- Centring Collar Diameter:
- 95 mm
- Number Of Motor Stacks:
- 2
- Stator Inductance:
- 9.79 mH 20 °C
- Holding Brake:
- with
- Holding Torque:
- 5.5 N.m holding brake
- Pvc Free:
- Yes
- Supply Voltage Limits:
- 208-480 V
- Maximum Radial Force Fr:
- 990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
- Rohs Exemption Information:
- Yes
- Electrical Connection:
- printed circuit board connector
- Continuous Stall Torque:
- 6 N.m 208...480 V three phase
- Emc Filter:
- integrated
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Centring Collar Depth:
- 3.5 mm
- Torque Constant:
- 1.28 N.m/A 20 °C
- Supply Frequency:
- 50/60 Hz - 5...5 %
- Stator Electrical Time Constant:
- 4.17 ms 20 °C
- Feedback Type:
- absolute multiturn SinCos Hiperface
- Maximum Current Irms:
- 17.5 A 208 V, three phase || 17.5 A 400 V, three phase || 17.5 A 480 V, three phase
- Peak Stall Torque:
- 14 N.m 208 V three phase || 14 N.m 400 V three phase || 14 N.m 480 V three phase
- Shaft Diameter:
- 19 mm
- Nominal Output Power:
- 1000 W 208 V three phase || 1900 W 400 V three phase || 1900 W 480 V three phase
- [Us] Rated Supply Voltage:
- 208...480 V - 15...10 %
- Length:
- 282 mm
- China Rohs Regulation:
- X
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Range Compatibility:
- Lexium 32i
- Rotor Inertia:
- 6.77 kg.cm²
- Nominal Torque:
- 5.1 N.m 400 V three phase || 5.4 N.m 208 V three phase || 4.1 N.m 480 V three phase
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Continuous Output Current:
- 4 A 8 kHz
- Key Width:
- 6 mm
- Number Of Motor Poles:
- 10
- Sustainable Offer Status:
- Green Premium product
- Circle Diameter Of The Mounting Holes:
- 115-115 mm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Maximum Axial Force Fa:
- 0.2 x Fr
- Mercury Free:
- Yes
- Environmental Disclosure:
- ENVPEP1312017EN
- Distance Shaft Shoulder-Flange:
- 3.5 mm
- Number Of Mounting Holes:
- 4
- Datasheet:
- View