Schneider Electric BRS397W271ACA Lexium Stepper Motor, Size 90, 2.26 Nm,
$2,216.11
Schneider Electric
Schneider Electric BRS397W270ACB Lexium Stepper Motor, Size 90, 2.26 Nm,
Schneider Electric
$1,694.68
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric BRS397W270ACB Lexium Stepper Motor, Size 90, 2.26 Nm,
3-phase stepper motor - 2.26 Nm - shaft 9.5mm - L=68mm - w/o brake - conn
- Length:
- 111 mm
- Angular Acceleration:
- 200000 rad/s²
- Warranty:
- 18 months
- Device Short Name:
- BRS3
- Relative Humidity:
- 15-85 % without condensation
- Motor Type:
- 3-phase stepper motor
- Supply Voltage Limits:
- 230-230 V AC || 325-325 V DC
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Circularity Profile:
- N/A
- Vibration Resistance:
- 20 m/s² maximum || A EN/IEC 60034-14
- Sustainable Offer Status:
- Green Premium product
- Range Compatibility:
- Lexium SD3
- Motor Flange Size:
- 85 mm
- Shaft End:
- untapped
- Centring Collar Depth:
- 2 mm
- Maximum Starting Frequency:
- 5.3 kHz
- Maximum Axial Force Fa:
- 175 N tensile force) || 30 N force pressure)
- Pvc Free:
- Yes
- Ambient Air Temperature For Storage:
- -25-70 °C
- Continuous Stall Torque:
- 1.9 N.m
- Centring Collar Diameter:
- 73 mm
- Line Rated Current:
- 1.75 A
- Type Of Cooling:
- natural convection
- Holding Brake:
- without
- Shaft Diameter:
- 9.5 mm
- Maximum Mechanical Speed:
- 3000 rpm
- Time Constant:
- 7 ms
- Shaft Length:
- 30 mm
- Resolution:
- 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
- Maximum Radial Force Fr:
- 100 N first shaft end) || 50 N second shaft end)
- Number Of Mounting Holes:
- 4
- Environmental Disclosure:
- ENVPEP111101EN
- Operating Altitude:
- <= 3280.84 ft (1000 m) without power derating
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Second Shaft:
- with second shaft end
- Accuracy Error:
- +/- 6 arc min
- China Rohs Regulation:
- X
- Temperature Class:
- F winding IEC/EN 60034-1
- Ambient Air Temperature For Operation:
- -25-40 °C
- Number Of Motor Poles:
- 6
- Mounting Support:
- flange
- Holding Torque:
- 2.26 N.m
- Ip Degree Of Protection:
- shaft bushing IP41 EN/IEC 60034-5 || total except shaft bushing IP56 EN/IEC 60034-5
- Resistance:
- 6.5 Ohm winding)
- Rohs Exemption Information:
- Yes
- Mercury Free:
- Yes
- Service Life In Hours:
- 20000 h bearing)
- Nominal Torque:
- 2 N.m
- Product Or Component Type:
- motion control motor
- Standards:
- IEC 60072-1 || EN 50347
- Peak Stall Torque:
- 1.9 N.m
- Rotor Inertia:
- 1.1 kg.cm²
- Net Weight:
- 2.1 kg
- Circle Diameter Of The Mounting Holes:
- 98.99 mm
- Electrical Connection:
- connector
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Mounting Holes Diameter:
- 6.5 mm
- Catalog:
- View
- Datasheet:
- View
