Schneider Electric HDA36060U31X Molded Case Circuit Breaker 600V 60A

(No reviews yet) Write a Review
SKU:
HDA36060U31X
UPC:
785901309680
Condition:
New
Quality Labels:
CE
Pollution Degree:
3 IEC 60947-1
Height:
163 mm
Network Frequency:
50/60 Hz
Suitability For Isolation:
yes IEC 60947-2
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Product Name:
PowerPact H
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Terminal Identifier:
AL150HD
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz || 14 kA 600 V AC 50/60 Hz || 20 kA 250 V DC
Net Weight:
2.2 kg
Environmental Disclosure:
ENVPEP2206028EN
Mercury Free:
Yes
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circularity Profile:
ENVEOLI2206028EN
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Quantity Per Set:
1
Continuous Current Rating:
0.8
Utilisation Category:
category A
Eu Rohs Directive:
Compliant with Exemptions
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Rohs Exemption Information:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Mounting Mode:
I-Line bracket)
Depth:
86 mm
Control Type:
toggle
Line Rated Current:
60-60 A
Ambient Air Temperature For Storage:
-50-85 °C
Ambient Air Temperature For Operation:
-2-70 °C
Trip Unit Technology:
electronic, standard, MicroLogic 3.2, LI
Mounting Support:
bracket
Color:
Black
Sustainable Offer Status:
Green Premium product
Trip Unit Name:
MicroLogic 3.2
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Wire Stripping Length:
16 mm
Pvc Free:
Yes
Poles Description:
3P
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Device Application:
distribution
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Circuit Breaker Application:
HACR rated
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Phase Connection:
ABC
Breaking Capacity Code:
D
Electrical Connection:
I-Line connection, line || lugs, load
Product Or Component Type:
circuit breaker
Warranty:
18 months
Ip Degree Of Protection:
front cover IP40 IEC 60529
Range:
PowerPact
Protected Poles Description:
3t
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Width:
104 mm
Communication Interface:
Modbus || Ethernet
Product Certifications:
UL || CSA || NOM
Mounting Height:
4.5 in
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
  • Schneider Electric HDA36060U31X Molded Case Circuit Breaker 600V 60A
  • Schneider Electric HDA36060U31X Molded Case Circuit Breaker 600V 60A
  • Schneider Electric HDA36060U31X Molded Case Circuit Breaker 600V 60A
$1,316.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Standard with a 3.2 trip unit and an LI function with a breaking capacity of 14kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 60A, 3 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose