Schneider Electric HDA36150 Molded Case Circuit Breaker 600V 150A

(No reviews yet) Write a Review
SKU:
HDA36150
UPC:
785901420002
Condition:
New
Height:
163 mm
Line Rated Current:
150-150 A
Depth:
86 mm
Warranty:
18 months
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Width:
104 mm
Local Signalling:
switched off (OFF) 1 trip indicator green)
Phase Connection:
ABC
Pollution Degree:
3 IEC 60947-1
Device Application:
distribution
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Continuous Current Rating:
0.8
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz || 14 kA 600 V AC 50/60 Hz || 20 kA 250 V DC
Product Or Component Type:
circuit breaker
Ambient Air Temperature For Operation:
-2-70 °C
Communication Interface:
Modbus || Ethernet
Mounting Height:
4.5 in
Circularity Profile:
ENVEOLI2206027EN
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Trip Unit Technology:
thermal-magnetic
Utilisation Category:
category A
Product Name:
PowerPact H
Product Certifications:
UL || CSA || NOM
Net Weight:
2.2 kg
Magnetic Tripping Current:
1700-1700 A
Environmental Disclosure:
ENVPEP2206027EN
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Terminal Identifier:
AL150HD
Mounting Mode:
I-Line bracket)
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Mounting Support:
bracket
Ambient Air Temperature For Storage:
-50-85 °C
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Range:
PowerPact
Mercury Free:
Yes
Quantity Per Set:
1
Wire Stripping Length:
16 mm
Ip Degree Of Protection:
front cover IP40 IEC 60529
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Rohs Exemption Information:
Yes
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Color:
Black
Control Type:
toggle
Sustainable Offer Status:
Green Premium product
Protected Poles Description:
3t
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Compliant with Exemptions
Breaking Capacity Code:
D
Pvc Free:
Yes
Suitability For Isolation:
yes IEC 60947-2
Circuit Breaker Application:
HACR rated
Poles Description:
3P
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Magnetic Hold Current:
900 A
Electrical Connection:
I-Line connection, line || lugs, load
Network Frequency:
50/60 Hz
Quality Labels:
CE
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric HDA36150 Molded Case Circuit Breaker 600V 150A
  • Schneider Electric HDA36150 Molded Case Circuit Breaker 600V 150A
  • Schneider Electric HDA36150 Molded Case Circuit Breaker 600V 150A
$2,730.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 14kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 150A, 3 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose