Schneider Electric HDA36150U33X Molded Case Circuit Breaker 600V 150A

(No reviews yet) Write a Review
SKU:
HDA36150U33X
UPC:
785901944454
Condition:
New
Trip Unit Technology:
electronic, standard, MicroLogic 3.2 S, LSI
Continuous Current Rating:
0.8
Suitability For Isolation:
yes IEC 60947-2
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Device Application:
distribution
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Circularity Profile:
ENVEOLI2206028EN
Ip Degree Of Protection:
front cover IP40 IEC 60529
Pvc Free:
Yes
Warranty:
18 months
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Sustainable Offer Status:
Green Premium product
Rohs Exemption Information:
Yes
Quality Labels:
CE
Poles Description:
3P
Trip Unit Name:
MicroLogic 3.2 S
Environmental Disclosure:
ENVPEP2206028EN
Wire Stripping Length:
16 mm
Network Frequency:
50/60 Hz
Net Weight:
2.2 kg
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Electrical Connection:
I-Line connection, line || lugs, load
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz || 14 kA 600 V AC 50/60 Hz || 20 kA 250 V DC
Height:
163 mm
Phase Connection:
ABC
Quantity Per Set:
1
Breaking Capacity Code:
D
Product Name:
PowerPact H
Product Or Component Type:
circuit breaker
Depth:
86 mm
Product Certifications:
UL || CSA || NOM
Control Type:
toggle
Ambient Air Temperature For Storage:
-50-85 °C
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Range:
PowerPact
Mounting Support:
bracket
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Line Rated Current:
150-150 A
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Utilisation Category:
category A
Mounting Height:
4.5 in
Width:
104 mm
Terminal Identifier:
AL150HD
Ambient Air Temperature For Operation:
-2-70 °C
Mounting Mode:
I-Line bracket)
Communication Interface:
Modbus || Ethernet
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Eu Rohs Directive:
Compliant with Exemptions
Circuit Breaker Application:
HACR rated
Protected Poles Description:
3t
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Mercury Free:
Yes
Color:
Black
Pollution Degree:
3 IEC 60947-1
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
  • Schneider Electric HDA36150U33X Molded Case Circuit Breaker 600V 150A
  • Schneider Electric HDA36150U33X Molded Case Circuit Breaker 600V 150A
  • Schneider Electric HDA36150U33X Molded Case Circuit Breaker 600V 150A
$3,107.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Standard with a 3.2S trip unit and an LSI function with a breaking capacity of 14kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 150A, 3 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose