Schneider Electric HDL26015 Molded Case Circuit Breaker 600V 15A

(No reviews yet) Write a Review
SKU:
HDL26015
UPC:
785901458869
Condition:
New
Control Type:
toggle
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz || 14 kA 600 V AC 50/60 Hz || 20 kA 250 V DC
Terminal Identifier:
AL150HD
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Circuit Breaker Application:
HACR rated
Sustainable Offer Status:
Green Premium product
Ambient Air Temperature For Storage:
-50-85 °C
Suitability For Isolation:
yes IEC 60947-2
Product Or Component Type:
circuit breaker
Quality Labels:
CE
Warranty:
18 months
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Pollution Degree:
3 IEC 60947-1
Device Application:
distribution
Height:
163 mm
Protected Poles Description:
2t
Local Signalling:
switched off (OFF) 1 trip indicator green)
Continuous Current Rating:
0.8
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Network Frequency:
50/60 Hz
Net Weight:
2.2 kg
Mounting Mode:
unit mount lug)
Color:
Black
Product Name:
PowerPact H
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Mercury Free:
Yes
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Breaking Capacity Code:
D
Magnetic Hold Current:
350 A
Magnetic Tripping Current:
750-750 A
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Width:
104 mm
Rohs Exemption Information:
Yes
Mounting Support:
lug
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Range:
PowerPact
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Utilisation Category:
category A
Line Rated Current:
15-15 A
Trip Unit Technology:
thermal-magnetic
Ambient Air Temperature For Operation:
-2-70 °C
Depth:
86 mm
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Environmental Disclosure:
ENVPEP2206027EN
Communication Interface:
Modbus || Ethernet
Poles Description:
2P
Product Certifications:
UL || CSA || NOM
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Wire Stripping Length:
16 mm
Pvc Free:
Yes
Quantity Per Set:
1
Ip Degree Of Protection:
front cover IP40 IEC 60529
Electrical Connection:
lugs, line || lugs, load
Circularity Profile:
ENVEOLI2206027EN
Eu Rohs Directive:
Compliant with Exemptions
  • Schneider Electric HDL26015 Molded Case Circuit Breaker 600V 15A
  • Schneider Electric HDL26015 Molded Case Circuit Breaker 600V 15A
  • Schneider Electric HDL26015 Molded Case Circuit Breaker 600V 15A
$870.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 14kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 15A, 2 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose