Schneider Electric HDL36050T Molded Case Circuit Breaker 600V 50A

(No reviews yet) Write a Review
SKU:
HDL36050T
UPC:
785901395058
Condition:
New
Environmental Disclosure:
ENVPEP2206027EN
Eu Rohs Directive:
Compliant with Exemptions
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Line Rated Current:
50-50 A
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz || 14 kA 600 V AC 50/60 Hz || 20 kA 250 V DC
Trip Unit Technology:
thermal-magnetic
Communication Interface:
Modbus || Ethernet
Magnetic Hold Current:
400 A
Breaking Capacity Code:
D
Mounting Mode:
unit mount lug)
Utilisation Category:
category A
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Electrical Connection:
lugs, line || lugs, load
Ip Degree Of Protection:
front cover IP40 IEC 60529
Device Application:
distribution
Terminal Identifier:
AL150HD
Product Name:
PowerPact H
Circuit Breaker Application:
HACR rated
Network Frequency:
50/60 Hz
Continuous Current Rating:
0.8
Suitability For Isolation:
yes IEC 60947-2
Product Certifications:
UL || CSA || NOM
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Rohs Exemption Information:
Yes
Height:
163 mm
Mounting Support:
lug
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Installed Device:
trip unit field installable
Pollution Degree:
3 IEC 60947-1
Color:
Black
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Quality Labels:
CE
Range:
PowerPact
Product Or Component Type:
circuit breaker
Warranty:
18 months
Control Type:
toggle
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Ambient Air Temperature For Operation:
-2-70 °C
Ambient Air Temperature For Storage:
-50-85 °C
Net Weight:
2.2 kg
Width:
104 mm
Mercury Free:
Yes
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Sustainable Offer Status:
Green Premium product
Protected Poles Description:
3t
Wire Stripping Length:
16 mm
Magnetic Tripping Current:
850-850 A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circularity Profile:
ENVEOLI2206027EN
Pvc Free:
Yes
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Local Signalling:
switched off (OFF) 1 trip indicator green)
Depth:
86 mm
Poles Description:
3P
Quantity Per Set:
1
$1,632.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 14kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 50A, 3 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80%. This unit allows field-interchangeable trip units. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose