Schneider Electric HDL36150U33X Molded Case Circuit Breaker 600V 150A

(No reviews yet) Write a Review
SKU:
HDL36150U33X
UPC:
785901564102
Condition:
New
Mercury Free:
Yes
Quality Labels:
CE
Height:
163 mm
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Certifications:
UL || CSA || NOM
Breaking Capacity Code:
D
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Range:
PowerPact
Line Rated Current:
150-150 A
Wire Stripping Length:
16 mm
Sustainable Offer Status:
Green Premium product
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Pvc Free:
Yes
Protected Poles Description:
3t
Utilisation Category:
category A
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Warranty:
18 months
Product Name:
PowerPact H
Poles Description:
3P
Mounting Mode:
unit mount lug)
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Width:
104 mm
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz || 14 kA 600 V AC 50/60 Hz || 20 kA 250 V DC
Product Or Component Type:
circuit breaker
Rohs Exemption Information:
Yes
Device Application:
distribution
Ambient Air Temperature For Operation:
-2-70 °C
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Electrical Connection:
lugs, line || lugs, load
Continuous Current Rating:
0.8
Suitability For Isolation:
yes IEC 60947-2
Circuit Breaker Application:
HACR rated
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Network Frequency:
50/60 Hz
Communication Interface:
Modbus || Ethernet
Trip Unit Name:
MicroLogic 3.2 S
Net Weight:
2.2 kg
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Trip Unit Technology:
electronic, standard, MicroLogic 3.2 S, LSI
Ip Degree Of Protection:
front cover IP40 IEC 60529
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Ambient Air Temperature For Storage:
-50-85 °C
Eu Rohs Directive:
Compliant with Exemptions
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Support:
lug
Circularity Profile:
ENVEOLI2206028EN
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Quantity Per Set:
1
Pollution Degree:
3 IEC 60947-1
Control Type:
toggle
Terminal Identifier:
AL150HD
Color:
Black
Depth:
86 mm
Environmental Disclosure:
ENVPEP2206028EN
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
  • Schneider Electric HDL36150U33X Molded Case Circuit Breaker 600V 150A
  • Schneider Electric HDL36150U33X Molded Case Circuit Breaker 600V 150A
  • Schneider Electric HDL36150U33X Molded Case Circuit Breaker 600V 150A
$2,945.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Standard with a 3.2S trip unit and an LSI function with a breaking capacity of 14kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 150A, 3 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose