Schneider Electric HGL36125AA Molded Case Circuit Breaker 600V 125A

(No reviews yet) Write a Review
SKU:
HGL36125AA
UPC:
785901054313
Condition:
New
Product Certifications:
UL || CSA || NOM
Accessory / Separate Part Type:
auxiliary switch 24 V AC/DC 1 NO + 1 NC cover frame
Depth:
86 mm
Ambient Air Temperature For Storage:
-50-85 °C
Product Or Component Type:
circuit breaker
Line Rated Current:
125-125 A
Protected Poles Description:
3t
Mercury Free:
Yes
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Environmental Disclosure:
ENVPEP2206027EN
Continuous Current Rating:
0.8
Quality Labels:
CE
Terminal Identifier:
AL150HD
Product Name:
PowerPact H
Height:
163 mm
Magnetic Hold Current:
900 A
Magnetic Tripping Current:
1700-1700 A
Network Frequency:
50/60 Hz
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Device Application:
distribution
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Net Weight:
2.2 kg
Mounting Support:
lug
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Width:
104 mm
Wire Stripping Length:
16 mm
Circuit Breaker Application:
HACR rated
Suitability For Isolation:
yes IEC 60947-2
Local Signalling:
switched off (OFF) 1 trip indicator green)
Sustainable Offer Status:
Green Premium product
Ambient Air Temperature For Operation:
-2-70 °C
Pvc Free:
Yes
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Control Type:
toggle
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Rohs Exemption Information:
Yes
Circularity Profile:
ENVEOLI2206027EN
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Warranty:
18 months
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Poles Description:
3P
Quantity Per Set:
1
Electrical Connection:
lugs, line || lugs, load
Eu Rohs Directive:
Compliant with Exemptions
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Color:
Black
Trip Unit Technology:
thermal-magnetic
Range:
PowerPact
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Mounting Mode:
unit mount lug)
Pollution Degree:
3 IEC 60947-1
Utilisation Category:
category A
Communication Interface:
Modbus || Ethernet
Breaking Capacity Code:
G
Ip Degree Of Protection:
front cover IP40 IEC 60529
$3,896.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 18kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 125A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80%. This unit includes a factory installed 1A/1B auxiliary switch. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose