Schneider Electric HJA36110SA Molded Case Circuit Breaker 600V 110A

(No reviews yet) Write a Review
SKU:
HJA36110SA
UPC:
785901676966
Condition:
New
Quality Labels:
CE
Poles Description:
3P
Control Type:
toggle
Communication Interface:
Modbus || Ethernet
Circuit Breaker Application:
HACR rated
Sustainable Offer Status:
Green Premium product
Terminal Identifier:
AL150HD
Width:
104 mm
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Ip Degree Of Protection:
front cover IP40 IEC 60529
[Ics] Rated Service Breaking Capacity:
100 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 65 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 25 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Mounting Support:
bracket
Utilisation Category:
category A
Network Frequency:
50/60 Hz
Mounting Mode:
I-Line bracket)
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Accessory / Separate Part Type:
shunt trip 110...130 V AC compartment
Circularity Profile:
ENVEOLI2206027EN
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Environmental Disclosure:
ENVPEP2206027EN
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Magnetic Tripping Current:
1700-1700 A
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Phase Connection:
ABC
Mounting Height:
4.5 in
Height:
163 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Mercury Free:
Yes
Pollution Degree:
3 IEC 60947-1
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Quantity Per Set:
1
Depth:
86 mm
Product Or Component Type:
circuit breaker
Protected Poles Description:
3t
Rohs Exemption Information:
Yes
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Net Weight:
2.2 kg
Eu Rohs Directive:
Compliant with Exemptions
Color:
Black
Line Rated Current:
110-110 A
Breaking Capacity Code:
J
Trip Unit Technology:
thermal-magnetic
Magnetic Hold Current:
900 A
Range:
PowerPact
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Electrical Connection:
I-Line connection, line || lugs, load
Product Certifications:
UL || CSA || NOM
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Ambient Air Temperature For Operation:
-2-70 °C
Device Application:
distribution
Wire Stripping Length:
16 mm
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Product Name:
PowerPact H
Suitability For Isolation:
yes IEC 60947-2
Continuous Current Rating:
0.8
Pvc Free:
Yes
Ambient Air Temperature For Storage:
-50-85 °C
Warranty:
18 months
Local Signalling:
switched off (OFF) 1 trip indicator green)
Brochure:
View
Catalog:
View
Datasheet:
View
$9,223.50

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 110A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This unit includes a factory installed 120VAC shunt trip. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose