Schneider Electric HJF36125 Molded Case Circuit Breaker 600V 125A

(No reviews yet) Write a Review
SKU:
HJF36125
UPC:
7.85901E+11
Condition:
New
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Range:
PowerPact
Environmental Disclosure:
ENVPEP2206027EN
Magnetic Hold Current:
900 A
Width:
104 mm
Mounting Mode:
unit mount busbar)
Local Signalling:
switched off (OFF) 1 trip indicator green)
Quantity Per Set:
1
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Network Frequency:
50/60 Hz
Product Certifications:
UL || CSA || NOM
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Control Type:
toggle
Line Rated Current:
125-125 A
Mounting Support:
busbar
Suitability For Isolation:
yes IEC 60947-2
Pvc Free:
Yes
Trip Unit Technology:
thermal-magnetic
Net Weight:
2.2 kg
Ambient Air Temperature For Operation:
-2-70 °C
Magnetic Tripping Current:
1700-1700 A
Eu Rohs Directive:
Compliant with Exemptions
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Mercury Free:
Yes
Wire Stripping Length:
16 mm
Electrical Connection:
busbar connection, line || busbar connection, load
Protected Poles Description:
3t
Poles Description:
3P
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Communication Interface:
Modbus || Ethernet
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Utilisation Category:
category A
[Ics] Rated Service Breaking Capacity:
100 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 65 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 25 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Product Name:
PowerPact H
Ambient Air Temperature For Storage:
-50-85 °C
Pollution Degree:
3 IEC 60947-1
Depth:
86 mm
Terminal Identifier:
AL150HD
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Height:
163 mm
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Or Component Type:
circuit breaker
Ip Degree Of Protection:
front cover IP40 IEC 60529
Circularity Profile:
ENVEOLI2206027EN
Warranty:
18 months
Continuous Current Rating:
0.8
Sustainable Offer Status:
Green Premium product
Color:
Black
Circuit Breaker Application:
HACR rated
Quality Labels:
CE
Device Application:
distribution
Rohs Exemption Information:
Yes
Breaking Capacity Code:
J
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric HJF36125 Molded Case Circuit Breaker 600V 125A
  • Schneider Electric HJF36125 Molded Case Circuit Breaker 600V 125A
$5,174.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has a busbar connection. This PowerPacT H, 125A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose