
Schneider Electric ILA2E571TC1A0 Lexium Ila Servomot 24 48V Ethcat Enc
Schneider Electric
$1,805.00
integrated drive ILA with servo motor - 24..48 V - EtherCAT - indus connector
- Marking:
- CE
- Motor Type:
- AC Synchronous Servo Motor
- Maximum Axial Force Fa:
- 104 N force pressure) || 104 N tensile force)
- Centring Collar Depth:
- 1.6 mm
- Number Of Motor Stacks:
- 1
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating
- Number Of Motor Poles:
- 6
- Relative Humidity:
- 15-85 % without condensation
- Net Weight:
- 1.4 kg
- Circle Diameter Of The Mounting Holes:
- 66.6 mm
- Rohs Exemption Information:
- Yes
- Nominal Speed:
- 5000 rpm 24 V || 7000 rpm 48 V
- Ambient Air Temperature For Operation:
- 40-55 °C with power derating of 2 % per °C) || 0-40 °C without derating)
- Winding Type:
- high speed of rotation and medium torque
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Nominal Torque:
- 0.31 N.m
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Ambient Air Temperature For Storage:
- -25-70 °C
- Discrete Output Voltage:
- 23...25 V
- Service Life In Hours:
- 20000 h bearing
- Associated Fuse Rating:
- 16 A
- Rotor Inertia:
- 0.095 kg.cm²
- Shaft Length:
- 20 mm
- China Rohs Regulation:
- X
- Transmission Rate:
- 100 Mbits
- Mounting Holes Diameter:
- 5.2 mm
- Environmental Disclosure:
- ENVPEP2011004EN
- Network Type:
- DC
- Second Shaft:
- without second shaft end
- Range Of Product:
- Lexium integrated drive
- Mercury Free:
- Yes
- Electrical Connection:
- industrial connector
- Device Short Name:
- ILA
- Discrete Input Current:
- 10-10 mA at 24 V safety input || 2-2 mA at 24 V 24 V signal interface
- Centring Collar Diameter:
- 50 mm
- Permissible Ambient Air Temperature Around The Device:
- 105 °C power amplifier || 110 °C motor
- Phase:
- single phase
- Peak Stall Torque:
- 0.45 N.m
- [Us] Rated Supply Voltage:
- 48 V || 24 V
- Shaft End:
- untapped
- Voltage State 0 Guaranteed:
- -3...4.5 V
- Input/Output Type:
- 4 signals (each be used as input or output)
- Feedback Type:
- single turn encoder
- Voltage State 1 Guaranteed:
- 15...30 V
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Maximum Switching Current:
- 100 mA per output || 200 mA total
- Communication Interface:
- EtherCAT, Integrated
- Sustainable Offer Status:
- Green Premium product
- Motor Flange Size:
- 57 mm
- Accuracy Error:
- +/- 0.05 °
- Product Or Component Type:
- motion integrated drive
- Warranty:
- 18 months
- Speed Feedback Resolution:
- 16384 points/turn
- Holding Brake:
- without
- Vibration Resistance:
- 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
- Ip Degree Of Protection:
- shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
- Mounting Support:
- flange
- Product Certifications:
- UL || TÃV || cUL
- Shaft Diameter:
- 9 mm
- Protection Type:
- safe torque off || overload of output voltage || short circuit of the output voltage
- Circularity Profile:
- ENVEOLI2011004EN
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Number Of Mounting Holes:
- 4
- Continuous Stall Torque:
- 0.31 N.m
- Standards:
- IEC 61800-3 || EN 61800-3 : 2001-02 || IEC 50178 || EN 61800-3:2001, second environment || IEC 50347 || IEC 61800-3, Ed 2 || IEC 60072-1
- Supply Voltage Limits:
- 18-55.2 V
- Commissioning Interface:
- RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
- Length:
- 145.3 mm
- Pvc Free:
- Yes
- Current Consumption:
- 11000 mA peak || 7500 mA maximum continuous
- Maximum Radial Force Fr:
- 89 N
- Type Of Cooling:
- natural convection
- Gear Box Type:
- without
- Shock Resistance:
- 150 m/s² 1000 shocks IEC 60068-2-29
- Catalog:
- View
- Datasheet:
- View