50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating)
Centring Collar Depth:
2 mm
Environmental Disclosure:
ENVPEP1411002EN
Centring Collar Diameter:
60 mm
Discrete Input Current:
10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
Maximum Switching Current:
100 mA per output || 200 mA total
[Us] Rated Supply Voltage:
24 V || 36 V
Accuracy Error:
+/- 6 arc min
Number Of Mounting Holes:
4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Holding Brake:
without
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Rohs Exemption Information:
Yes
Continuous Stall Torque:
4 N.m
Network Type:
DC
Range Of Product:
Lexium integrated drive
Associated Fuse Rating:
0.416666666666667
Shaft Diameter:
12 mm
Voltage State 1 Guaranteed:
15...30 V
Length:
170.6 mm
Supply Voltage Limits:
18-40 V
Transmission Rate:
9.6, 19.2 and 38.4 kbauds
Discrete Output Voltage:
23...25 V
Number Of Motor Stacks:
2
Rotor Inertia:
2.2 kg.cm²
Relative Humidity:
15-85 % without condensation
Nominal Torque:
4 N.m
Shock Resistance:
150 m/s² 1000 shocks EN/IEC 60068-2-29
Mounting Holes Diameter:
6.5 mm
Shaft Length:
30 mm
Warranty:
18 months
Maximum Radial Force Fr:
100 N
Second Shaft:
without second shaft end
Service Life In Hours:
20000 h bearing
Communication Interface:
RS485, Integrated
Marking:
CE
Speed Feedback Resolution:
20000 points/turn
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles EN/IEC 60068-2-6
Protection Type:
overload of output voltage || safe torque off || short circuit of the output voltage
Winding Type:
medium speed of rotation and medium torque
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Current Consumption:
5000 mA maximum
Mounting Support:
flange
Maximum Mechanical Speed:
1500 rpm
Input/Output Type:
4 signals (each be used as input or output)
Standards:
EN 50347 || EN/IEC 50178 || IEC 60072-1 || EN 61800-3 : 2001-02 || EN 61800-3:2001, second environment || EN/IEC 61800-3 || IEC 61800-3, Ed 2
Mercury Free:
Yes
Circularity Profile:
ENVEOLI1411002EN
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Type Of Cooling:
natural convection
Peak Stall Torque:
4 N.m
Product Or Component Type:
motion integrated drive
Shaft End:
untapped
China Rohs Regulation:
X
Holding Torque:
4 N.m
Number Of Motor Poles:
6
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
