Schneider Electric JGL36250C Molded Case Circuit Breaker 600V 250A

(No reviews yet) Write a Review
SKU:
JGL36250C
UPC:
785901552390
Condition:
New
Ambient Air Temperature For Operation:
-2-70 °C
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Net Weight:
2.4 kg
Terminal Identifier:
AL250JD
Poles Description:
3P
Local Signalling:
switched off (OFF) 1 trip indicator green)
Range:
PowerPact
Breaking Capacity Code:
G
Pvc Free:
Yes
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Magnetic Hold Current:
1250 A
Mounting Mode:
unit mount lug)
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Depth:
86 mm
Trip Unit Technology:
thermal-magnetic
Mounting Support:
lug
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Communication Interface:
Modbus || Ethernet
Product Name:
PowerPact J
Suitability For Isolation:
yes IEC 60947-2
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Device Application:
distribution
Width:
104 mm
Ambient Air Temperature For Storage:
-50-85 °C
Pollution Degree:
3 IEC 60947-1
Wire Stripping Length:
25 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Continuous Current Rating:
1
Product Certifications:
UL || CSA || NOM
Height:
191 mm
Protection Type:
overload protection || short-circuit protection
Quality Labels:
CE
Utilisation Category:
category A
Environmental Disclosure:
ENVPEP2206031EN
Ip Degree Of Protection:
front cover IP40
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Circularity Profile:
ENVEOLI2206031EN
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Magnetic Tripping Current:
2500-2500 A
Mercury Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Control Type:
toggle
Network Frequency:
50/60 Hz
Eu Rohs Directive:
Compliant with Exemptions
Sustainable Offer Status:
Green Premium product
Rohs Exemption Information:
Yes
Line Rated Current:
250-250 A
Electrical Connection:
lugs, line || lugs, load
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Warranty:
18 months
  • Schneider Electric JGL36250C Molded Case Circuit Breaker 600V 250A
  • Schneider Electric JGL36250C Molded Case Circuit Breaker 600V 250A
  • Schneider Electric JGL36250C Molded Case Circuit Breaker 600V 250A
$6,002.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 18kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 100%. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose