Schneider Electric JGM36250U31X Molded Case Circuit Breaker 600V 250A

(No reviews yet) Write a Review
SKU:
JGM36250U31X
UPC:
785901949244
Condition:
New
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Environmental Disclosure:
ENVPEP2206032EN
Circuit Breaker Application:
HACR rated
Communication Interface:
Modbus || Ethernet
Mounting Mode:
unit mount lug)
Pollution Degree:
3 IEC 60947-1
Ambient Air Temperature For Storage:
-50-85 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Depth:
86 mm
Poles Description:
3P
Mounting Height:
4.5 in
Ip Degree Of Protection:
front cover IP40
Rohs Exemption Information:
Yes
Product Name:
PowerPact J
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Control Type:
toggle
Pvc Free:
Yes
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Wire Stripping Length:
25 mm
Warranty:
18 months
Device Application:
distribution
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Quality Labels:
CE
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Breaking Capacity Code:
G
Trip Unit Name:
MicroLogic 3.2
Product Certifications:
UL || CSA || NOM
Sustainable Offer Status:
Green Premium product
Width:
104 mm
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Net Weight:
2.4 kg
Trip Unit Technology:
electronic, standard, MicroLogic 3.2, LI
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Line Rated Current:
250-250 A
Protection Type:
overload protection || short-circuit protection
Suitability For Isolation:
yes IEC 60947-2
Utilisation Category:
category A
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Network Frequency:
50/60 Hz
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Eu Rohs Directive:
Compliant with Exemptions
Ambient Air Temperature For Operation:
-2-70 °C
Product Or Component Type:
circuit breaker
Mercury Free:
Yes
Range:
PowerPact
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Mounting Support:
lug
Height:
191 mm
Terminal Identifier:
AL250JD
Phase Connection:
ABC
Continuous Current Rating:
0.8
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Circularity Profile:
ENVEOLI2206032EN
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm 1 LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Electrical Connection:
lugs, line || terminal nut, load
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric JGM36250U31X Molded Case Circuit Breaker 600V 250A
  • Schneider Electric JGM36250U31X Molded Case Circuit Breaker 600V 250A
  • Schneider Electric JGM36250U31X Molded Case Circuit Breaker 600V 250A
$4,006.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides Micrologic Standard with a 3.2 trip unit and an LI function with a breaking capacity of 18kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on the line side and terminal nuts on the load side. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose