Schneider Electric JJA36150 Molded Case Circuit Breaker 600V 150A

(No reviews yet) Write a Review
SKU:
JJA36150
UPC:
785901795919
Condition:
New
Mounting Height:
4.5 in
Breaking Capacity Code:
J
Pollution Degree:
3 IEC 60947-1
Product Name:
PowerPact J
Electrical Connection:
I-Line connection, line || lugs, load
Mercury Free:
Yes
Ip Degree Of Protection:
front cover IP40
Height:
191 mm
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Line Rated Current:
150-150 A
Trip Unit Technology:
thermal-magnetic
Continuous Current Rating:
0.8
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Compliant with Exemptions
Wire Stripping Length:
25 mm
Mounting Support:
bracket
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Tightening Torque:
25-25 N.m 25-95 mm² (AWG 4...AWG 4/0)
Net Weight:
2.4 kg
Terminal Identifier:
AL175JD
Ambient Air Temperature For Operation:
-2-70 °C
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Circuit Breaker Application:
HACR rated
Local Signalling:
switched off (OFF) 1 trip indicator green)
Product Or Component Type:
circuit breaker
Protection Type:
overload protection || short-circuit protection
Width:
104 mm
Control Type:
toggle
Sustainable Offer Status:
Green Premium product
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Pvc Free:
Yes
Long Time Pick-Up Adjustment Range:
0.25...1 x In
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Poles Description:
3P
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Suitability For Isolation:
yes IEC 60947-2
Quality Labels:
CE
Mounting Mode:
I-Line bracket)
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Range:
PowerPact
Magnetic Tripping Current:
1750-1750 A
Phase Connection:
ABC
Warranty:
18 months
Depth:
86 mm
Magnetic Hold Current:
750 A
Awg Gauge:
AWG 4...AWG 4/0 aluminium/copper terminal
Network Frequency:
50/60 Hz
Communication Interface:
Modbus || Ethernet
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Certifications:
UL || CSA || NOM
Ambient Air Temperature For Storage:
-50-85 °C
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Utilisation Category:
category A
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Circularity Profile:
ENVEOLI2206031EN
Device Application:
distribution
Environmental Disclosure:
ENVPEP2206031EN
Rohs Exemption Information:
Yes
  • Schneider Electric JJA36150 Molded Case Circuit Breaker 600V 150A
  • Schneider Electric JJA36150 Molded Case Circuit Breaker 600V 150A
  • Schneider Electric JJA36150 Molded Case Circuit Breaker 600V 150A
$5,705.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT J I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT J, 150A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose