Schneider Electric JJL36150T Molded Case Circuit Breaker 600V 150A

(No reviews yet) Write a Review
SKU:
JJL36150T
UPC:
785901760429
Condition:
New
Breaking Capacity Code:
J
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Poles Description:
3P
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Eu Rohs Directive:
Compliant with Exemptions
Terminal Identifier:
AL175JD
Suitability For Isolation:
yes IEC 60947-2
Warranty:
18 months
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Circularity Profile:
ENVEOLI2206031EN
Device Application:
distribution
Phase Connection:
CA
Electrical Connection:
lugs, line || lugs, load
Quality Labels:
CE
Network Frequency:
50/60 Hz
Magnetic Hold Current:
750 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Product Certifications:
UL || CSA || NOM
Sustainable Offer Status:
Green Premium product
Product Name:
PowerPact J
Net Weight:
2.4 kg
Communication Interface:
Modbus || Ethernet
Local Signalling:
switched off (OFF) 1 trip indicator green)
Tightening Torque:
25-25 N.m 25-95 mm² (AWG 4...AWG 4/0)
Protection Type:
overload protection || short-circuit protection
Pvc Free:
Yes
Wire Stripping Length:
25 mm
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Mounting Support:
lug
Utilisation Category:
category A
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Mounting Mode:
unit mount lug)
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Range:
PowerPact
Ip Degree Of Protection:
front cover IP40
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Mounting Height:
4.5 in
Circuit Breaker Application:
HACR rated
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Ambient Air Temperature For Operation:
-2-70 °C
Pollution Degree:
3 IEC 60947-1
Line Rated Current:
150-150 A
Ambient Air Temperature For Storage:
-50-85 °C
Product Or Component Type:
circuit breaker
Continuous Current Rating:
0.8
Environmental Disclosure:
ENVPEP2206031EN
Rohs Exemption Information:
Yes
Magnetic Tripping Current:
1750-1750 A
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Height:
191 mm
Control Type:
toggle
Depth:
86 mm
Trip Unit Technology:
thermal-magnetic
Awg Gauge:
AWG 4...AWG 4/0 aluminium/copper terminal
Width:
104 mm
$5,432.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 150A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80%. This unit allows field-interchangeable trip units. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose